We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM DDR5-5600 96GB ECC RDIMM CL46 1.1V 2Rx4 288-pin Supermicro X14SDW-64CM-SP9F memory upgrade

SKU CH-PCPJ-33KMH

96GB DDR5-5600 registered ECC RDIMM built for the Supermicro X14SDW-64CM-SP9F with CL46 timing and 1.1V operation

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 4 more
  • 96 GB capacity lets the Supermicro X14SDW-64CM-SP9F run fully populated at rated speed
  • DDR5-5600 PC5-44800 speed matches the board's memory controller for plug-and-play recognition
  • CL46 CAS latency at 1.1 V delivers the exact timing and voltage the platform expects
  • Registered ECC 2Rx4 architecture offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits the required slot type without adapters or mismatches

Exact-match upgrade for Supermicro X14SDW-64CM-SP9F

This 96GB DDR5-5600 registered ECC RDIMM is built to the precise specification the Supermicro X14SDW-64CM-SP9F memory controller expects. The 2Rx4 rank, 1.1V operating voltage and CL46 timing allow the module to be recognised at full capacity and run at its rated speed without manual tuning. It is intended for administrators who need a drop-in capacity increase for this specific server board.

Capacity and headroom

The kit delivers 96GB in a single 288-pin DDR5 RDIMM operating at 5600 MT/s (PC5-44800). Registered buffering offloads the memory controller so every populated slot can run at full capacity, while on-die ECC corrects single-bit errors before they reach the operating system. Headroom ends when the board's maximum supported DIMM count or total capacity is reached; the manual defines those limits.

Build integration

The module uses the 288-pin RDIMM form factor required by the X14SDW-64CM-SP9F — not UDIMM or SODIMM — and carries no heat spreader, so it fits standard server DIMM slots without clearance issues. Installation follows the motherboard's approved population order, which must be consulted before purchase. No additional cooling or voltage adjustment is needed beyond the board's native 1.1V DDR5 supply.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,866.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $29.86 per GB
Pricier than about 85% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will this 96GB DDR5-5600 2Rx4 RDIMM run at full speed alongside existing 1.1V DDR5 modules on my Supermicro X14SDW-64CM-SP9F?

Yes. This kit matches the board's 1.1V requirement, 5600 MT/s rating and 2Rx4 registered ECC layout, so mixed populations that follow the manual's slot order will operate at the rated speed.

How can I confirm the 96GB DDR5-5600 CL46 RDIMM is recognised correctly after installation?

Check the BIOS memory summary or OS tools such as dmidecode — they should show 96GB total, 5600 MT/s, registered ECC, 2Rx4 organisation and CL46 timings at 1.1V.

Does the MR44800-9624K1 box contain only the 288-pin RDIMM or are cables or a heat spreader included?

The package supplies the 96GB DDR5-5600 2Rx4 1.1V CL46 288-pin ECC RDIMM only; no heat spreader, cables or additional accessories are bundled.

More in Model-Specific Memory Upgrades

Similar items