We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black chips and gold edge connectors

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC Registered RDIMM 288-Pin memory upgrade

SKU CH-9VE7-7JE7M

96GB DDR5-5600 CL46 2Rx4 registered ECC RDIMM at 1.1V for GIGABYTE MZ73-LM1 motherboards

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 24 more
  • 96 GB capacity lets you fully populate the server for maximum throughput
  • Registered ECC design corrects single-bit errors on the fly to prevent silent data corruption
  • DDR5 5600 CL46 timing matches the motherboard specification for stable rated-speed operation
  • 1 V low voltage reduces power draw per module in dense configurations
  • 288-pin RDIMM form factor fits the GIGABYTE MZ73-LM1 motherboard exactly

Server memory for GIGABYTE MZ73-LM1

This 96GB DDR5 module is an exact-match upgrade for the GIGABYTE MZ73-LM1 motherboard. It delivers registered ECC architecture in a 288-pin RDIMM form factor that the board requires. The part number MR44800-9624K1 confirms the precise rank, voltage and timing the memory controller expects. Builders who need a different pin layout or non-ECC memory cannot use this module.

Sustained load behaviour

Registered buffering offloads the memory controller so every slot runs fully populated at rated speed without signal degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption during continuous operation. The 1.1V operating voltage keeps power draw stable across long workloads. Systems that do not support registered DIMMs will not benefit from this stability.

Deciding specification

The module runs at DDR5 5600 (PC5-44800) with CL46 latency in a 2Rx4 configuration. This speed and rank combination is the single specification that determines whether the motherboard recognises the full 96GB capacity at its rated frequency. Buyers whose platform requires a different data rate or rank structure must select another part.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,747.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $28.62 per GB
Pricier than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much power does this 96GB DDR5 5600 CL46 registered ECC kit draw at its rated 1.1V?

The module operates at 1.10V, the standard DDR5 voltage for registered ECC RDIMMs, so power draw scales with the 5600 MT/s data rate and 2Rx4 density rather than exceeding the platform budget.

What motherboard slot and memory controller features are required to run this 288-pin RDIMM at 5600 MT/s?

A DDR5-capable server board with registered DIMM support and an ECC-enabled memory controller is needed; the GIGABYTE MZ73-LM1 is the validated platform for this exact 96GB 2Rx4 configuration.

Can this 96GB 2Rx4 DDR5 5600 registered ECC module be mixed with other DDR5 RDIMMs of different rank or speed in the same system?

Mixing ranks or speeds is not recommended; the board's memory population rules expect identical 2Rx4 modules at 5600 MT/s to maintain registered ECC stability across all populated slots.

More in Model-Specific Memory Upgrades

Similar items