We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 32GB 4800MHz CL40 2Rx8 1.1V ECC Registered RDIMM memory upgrade

SKU CH-1GH0-8RXTV

32 GB DDR5 ECC registered DIMM running at 4800 MHz with CL40 latency and 1.1 V operation for the Supermicro H13SSL-N motherboard

  • Total capacity32 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact DDR5-4800 CL40 1.10V spec ensures full-speed recognition
  • 32GB 2Rx8 registered ECC RDIMM prevents silent data corruption
  • Verified fit for Supermicro H13SSL-N 288-pin RDIMM slots
  • Major Samsung Micron Hynix chips deliver enterprise-grade stability
  • Lifetime replacement warranty with US-based technical support included

32GB DDR5-4800 ECC RDIMM for Supermicro H13SSL-N

This 32GB DDR5-4800 Registered ECC module is built for the Supermicro H13SSL-N motherboard. It delivers 4800 MT/s at CL40 with a 1.10V operating voltage. The 2Rx8 organization matches the board's memory controller requirements for full-capacity recognition. System administrators expanding server memory capacity will find the exact specification match they need.

Registered buffer and 288-pin form factor ensure

The Registered RDIMM architecture buffers address and command signals, reducing electrical load on the memory controller when all slots are populated. ECC circuitry detects and corrects single-bit errors in real time, preventing silent data corruption. The 288-pin DDR5 connector is keyed differently from earlier generations, so it only fits compatible DDR5 server boards. No heat spreader is included, relying on chassis airflow for cooling.

Replaces slower or smaller DDR5 RDIMMs

Upgrading from lower-capacity DDR5 RDIMMs or slower speed grades restores headroom for virtualization, databases, and compute workloads. The jump is worth it when the motherboard manual confirms 32GB 2Rx8 Registered DIMMs in the planned population order. Buyers needing unbuffered UDIMMs, SODIMM form factors, or non-ECC memory for workstation or consumer platforms cannot use this module.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $827.99
Pricier than about 58% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $25.87 per GB
Pricier than about 71% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-328K1
Total capacity32 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB DDR5 4800 MHz PC5-38400 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does DDR5 4800MHz PC5-38400 run at its rated speed on the Supermicro H13SSL-N motherboard?

Yes, the module is spec-matched to the board's memory controller so it is recognised at full capacity and runs at DDR5 4800 (PC5-38400) without down-clocking.

What physical slot and form factor does this 288-pin RDIMM require?

It fits a standard 288-pin DDR5 RDIMM slot; the motherboard must accept registered DIMMs, not UDIMM or SODIMM.

How is the module installed and what step is often missed?

Power off the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then follow the motherboard manual's approved population order for registered ECC memory.

More in Model-Specific Memory Upgrades

Similar items