We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 4800 ECC Registered RDIMM 32GB 2x16GB CL40 1.1V 288-pin Supermicro H13SSL-N memory upgrade

SKU CH-MKZT-0V3TG

32 GB DDR5-4800 ECC registered RDIMM kit (2 × 16 GB, CL40, 1.10 V) validated for Supermicro H13SSL-N motherboards

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 32GB 2X16GB

Show 24 more
  • Exact-match 32 GB kit (2 × 16 GB) DDR5-4800 CL40 1.1 V for full-rated speed
  • Registered ECC RDIMM offloads controller and corrects single-bit errors on the fly
  • Verified fit for Supermicro H13SSL-N motherboard with 288-pin RDIMM slots
  • 1Rx8 rank and 1.1 V timing match board population rules for stable full-capacity use
  • Major OEM Samsung, Micron, Hynix chips with lifetime replacement warranty

Supermicro H13SSL-N DDR5 ECC RDIMM Kit

This 32GB kit contains two 16GB DDR5-4800 Registered ECC modules built to the exact specifications of the Supermicro H13SSL-N motherboard. The 1Rx8 organisation, CL40 timing and 1.10V voltage match the board's memory controller requirements for full-capacity recognition at rated speed.

288-Pin RDIMM Installation and Population Rules

The modules use the standard 288-pin RDIMM form factor required by the H13SSL-N and install like any server DIMM, but the board's population order and maximum supported capacity per slot are defined in the system manual. Skipping the manual's population sequence is the most common cause of modules not being detected or running at reduced speeds.

For Supermicro H13SSL-N Owners Needing Registered

This kit suits administrators upgrading a Supermicro H13SSL-N platform that requires Registered ECC DDR5 memory with a 1Rx8 rank structure. Builders needing unbuffered UDIMMs, SODIMM form factors, non-ECC modules, or capacities and speeds not validated for this specific motherboard should look elsewhere.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $934.99
Pricier than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $29.22 per GB
Pricier than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-618K2
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items32 GB 2 × 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How can I confirm the kit is running at DDR5 4800 CL40 1.10V after installation?

Check the BIOS memory information or a tool like CPU-Z; it should report DDR5-4800 (PC5-38400), CAS latency 40, 1.10 V, and 32 GB total across both 16 GB modules.

What does the package contain and is anything else required for the Supermicro H13SSL-N?

The box includes the matched 32 GB kit — two 16 GB 288-pin DDR5 RDIMMs (1Rx8, Registered ECC). No extra parts are needed; the motherboard accepts this form factor directly.

This kit is 32 GB (2×16 GB); how do I decide if that capacity fits my H13SSL-N configuration?

Consult the Supermicro H13SSL-N manual for maximum supported capacity per slot, approved population order, and any per-channel limits before choosing this 2×16 GB kit.

More in Model-Specific Memory Upgrades

Similar items