We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 4800 128GB 8x16GB CL40 1.1V 288-Pin ECC RDIMM Supermicro H13DSH memory upgrade

SKU CH-8Z3N-202XR

Eight 16 GB DDR5 registered ECC RDIMMs deliver 128 GB at 4800 MT/s with CL40 latency and 1.1 V operation for the Supermicro H13DSH motherboard

  • Total capacity128 GB (8 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact-match DDR5-4800 kit installs at rated speed without tuning
  • Registered ECC design corrects single-bit errors to protect data integrity
  • 128 GB across eight 16 GB modules fills every slot on the H13DSH
  • 1 V operation matches the board's memory-controller specification
  • 288-pin RDIMM form factor fits the Supermicro H13DSH motherboard exactly

System-Specific DDR5 ECC RDIMM Kit

This 128GB kit contains eight 16GB DDR5-4800 registered ECC modules built to the exact rank, voltage and timing the Supermicro H13DSH motherboard expects. It is for administrators who need the full capacity recognised at rated speed without manual tuning.

288-Pin Registered Form Factor

The modules use the 288-pin RDIMM form factor this board requires, not UDIMM or SODIMM. Registered architecture offloads the memory controller so every slot runs fully populated while ECC corrects single-bit errors on the fly.

DDR5-4800 CL40 1.10V Specification

The decisive figure is the DDR5-4800 (PC5-38400) speed with CL40 latency at 1.10V. If your server demands a different data rate, voltage or latency, this kit will not match the memory-controller profile.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $3,396.99
Pricier than about 74% of the 21,161 comparable items (median $397.99).
Total capacity 128 GB (8 × 16 GB)
Higher than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $26.54 per GB
Pricier than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-618K8
Total capacity128 GB (8 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items128 GB 8 × 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

What does the DDR5-4800 (PC5-38400) standard mean for the data rate of these modules?

The modules run at a 4800 MT/s data rate, which is the baseline speed defined by the DDR5-4800 specification for registered server memory.

What physical slot and form factor do these 288-pin RDIMMs require on the Supermicro H13DSH?

They install in standard 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMMs or SODIMMs.

What is the correct installation order for the eight 16 GB sticks on the H13DSH, and what step is often missed?

Follow the motherboard manual's population sequence for all eight slots; the step often missed is verifying the exact slot order before seating the modules.

More in Model-Specific Memory Upgrades

Similar items