We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 4800 16GB 2x8GB CL40 1.1V SODIMM memory upgrade for Supermicro X13SRN-E

SKU CH-HY9G-BB2B1

A 16 GB DDR5 SODIMM kit (2 × 8 GB) running at 4800 MHz CL40 1.1 V, validated for the Supermicro X13SRN-E motherboard

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB 2X8GB

  • 16 GB dual-channel kit lifts multitasking headroom
  • DDR5 4800 speed matches the Supermicro X13SRN-E memory controller
  • CL40 1.10 V timing runs at rated frequency without manual tuning
  • 262-pin SODIMM form factor fits the laptop slot exactly
  • Major OEM Samsung Micron Hynix chips validated for stability

Supermicro X13SRN-E DDR5 upgrade

This 16 GB kit contains two 8 GB DDR5 SODIMM modules built for the Supermicro X13SRN-E motherboard. The 262-pin unbuffered form factor matches the board's slots exactly. Each module runs at 4800 MHz with CL40 latency at 1.1 V. Major OEM chips from Samsung, Micron or Hynix provide tested stability.

Exact-match specification changes

The kit matches the precise rank, voltage and timing the memory controller expects so the system recognises full capacity at rated speed. Verified fitment eliminates the guesswork of generic modules that may not populate correctly. Lifetime replacement warranty and free US-based technical support back the upgrade.

DDR5 4800 SODIMM form factor

The 262-pin SODIMM layout is the single specification that decides compatibility; desktop UDIMMs will not fit. Buyers needing ECC or registered memory must choose a different product. Consult the system manual for supported capacities and population order before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $154.99
Cheaper than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $9.69 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered SODIMM Memory
Part numberMS38400-818K2
Total capacity16 GB (2 × 8 GB)
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB 2 × 8 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 1Rx8 rank configuration on these 8 GB modules require any future replacement if I expand to the board's maximum capacity?

The kit uses 1Rx8 organization on each 8 GB SODIMM, so adding more modules later simply means filling remaining slots with the same rank layout — no replacement of the original pair is needed.

What limit appears first when the memory runs continuously at DDR5 4800?

Sustained operation at 4800 MT/s is constrained by the CL40 latency and 1.10 V voltage the controller expects; exceeding either timing or voltage threshold causes instability before thermal limits become an issue.

How much heat and power do the two SODIMMs draw when the system runs all day?

Each module operates at 1.10 V without a heat spreader, so total power stays low and passive airflow in the chassis is sufficient — no active cooling or extra noise is introduced.

More in Model-Specific Memory Upgrades

Similar items