We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM Laptop X13SRN-E memory upgrade

SKU CH-MHMR-YKYYK

16 GB DDR5 SODIMM at 4800 MHz with CL40 latency and 1.1 V, verified for Supermicro X13SRN-E

  • Total capacity16 GB
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 16GB

  • Precise DDR5-4800 timing matches your laptop controller for full-speed recognition
  • Verified fit for Supermicro X13SRN-E motherboard with correct 262-pin SODIMM form factor
  • Major OEM chips from Samsung, Micron or Hynix tested at rated speed and voltage
  • Low 1.1V operation reduces power draw while delivering 16GB capacity
  • Single-rank 1Rx8 layout follows system population rules for stable upgrades

Exact-match upgrade for Supermicro X13SRN-E

This 16GB DDR5 SODIMM is built to the precise specifications the Supermicro X13SRN-E memory controller expects. It installs as a direct replacement or capacity addition and is recognised at full size and rated speed without manual configuration. The 262-pin unbuffered form factor matches the laptop slot exactly.

Sustained-load stability with major OEM chips

Modules use Samsung, Micron or Hynix components and are tested for stability at the rated 4800 speed, CL40 timing and 1.10V voltage. The 1Rx8 rank organisation maintains consistent throughput during extended workloads rather than throttling after a short burst. Non-ECC unbuffered operation keeps latency low for typical laptop tasks.

1Rx8 rank decides population compatibility

The single-rank 1Rx8 layout determines how this module fits into the X13SRN-E memory-population rules. Systems that require dual-rank modules or a specific rank-per-channel limit will not accept this part. Verify the manual for supported capacities and approved slot order before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $148.99
Cheaper than about 62% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $9.31 per GB
Typical for this category: the median of 20,941 items is $8.19 per GB.

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered SODIMM Memory
Part numberMS38400-618K1
Total capacity16 GB
Product type262-Pin DDR5 SODIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 262-PIN Non-ECC SODIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How much heat does the 1.1V DDR5 4800 SODIMM produce during continuous all-day operation?

At 1.1V the module draws less power than higher-voltage DDR5, so it runs cooler under sustained load; no heat spreader is fitted, relying on the laptop's chassis airflow.

What must my Supermicro X13SRN-E already provide for this 262-pin DDR5 4800 stick to function?

The motherboard needs a DDR5 SODIMM slot wired for 1.1V unbuffered non-ECC memory and a BIOS that accepts 1Rx8 CL40 PC5-38400 modules at 4800 MT/s.

Will this 1Rx8 CL40 DDR5 4800 module run alongside any other DDR5 SODIMMs I keep in the X13SRN-E?

Mixing ranks or timings can force the controller to the slowest common settings; for best stability populate identical 1Rx8 CL40 4800 modules in the slots your manual specifies.

More in Model-Specific Memory Upgrades

Similar items