We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 96GB 6x16GB CL40 1.1V 1Rx8 Supermicro H14DSG-O-CPU memory upgrade

SKU CH-QJW3-CSQJ6

A 96 GB DDR5-4800 ECC registered kit of six 16 GB modules at 1.1 V CL40, validated for the Supermicro H14DSG-O-CPU motherboard

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • Exact-fit 96 GB DDR5 kit runs at rated 4800 MHz CL40 on Supermicro H14DSG-O-CPU
  • Registered ECC RDIMM architecture offloads controller and corrects single-bit errors for uptime
  • 1 V 1Rx8 modules match board voltage and rank specs for full-capacity recognition
  • 6 × 16 GB 288-pin layout follows motherboard population rules for stable multi-slot operation
  • Lifetime replacement warranty with free US-based technical support included

96GB DDR5-4800 ECC RDIMM kit for Supermicro

This 96GB kit contains six 16GB DDR5-4800 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-O-CPU memory controller expects. It targets administrators upgrading that specific platform to full capacity without guesswork.

288-pin Registered form factor

Each module uses the 288-pin RDIMM form factor required by the board; UDIMM or SODIMM alternatives will not fit. The registered architecture buffers address and command signals so all six slots can be populated at the rated 4800 MT/s speed.

1.1V operation with CL40 latency

Running at 1.1V, the kit draws minimal power for its density while maintaining CL40 timings at DDR5-4800. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,831.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $29.50 per GB
Pricier than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-618K6
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 6 × 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does DDR5 4800 PC5-38400 run at its rated speed on the Supermicro H14DSG-O-CPU?

The kit is spec-matched to the board's memory controller so it is recognized at full capacity and runs at DDR5 4800 without downclocking.

What physical slot and form factor do these modules need on the Supermicro H14DSG-O-CPU?

They require six 288-pin DDR5 RDIMM slots; the board must accept registered DIMMs, not UDIMM or SODIMM.

In what order should I populate the six 16GB RDIMMs on this motherboard?

Follow the motherboard manual's approved DIMM population sequence for 1Rx8 registered modules to ensure all 96GB are detected.

More in Model-Specific Memory Upgrades

Similar items