We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 96GB 6x16GB CL40 1.1V H14DSG-OD memory upgrade

SKU CH-PCCM-7XBA9

A 96GB kit of six 16GB DDR5 4800 ECC registered DIMMs at 1.1V CL40, validated for the Supermicro H14DSG-OD motherboard

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered
  • 96 GB total capacity from six 16 GB modules
  • DDR5-4800 speed with CL40 latency at 1.10 V
  • ECC and registered design prevents silent data corruption
  • Exact-match kit validated for Supermicro H14DSG-OD motherboard
  • 288-pin RDIMM form factor fits required server slots

96GB DDR5-4800 ECC RDIMM kit

This 96GB kit contains six 16GB DDR5-4800 registered ECC RDIMMs built for the Supermicro H14DSG-OD motherboard. Each module runs at 1.1V with CL40 timing and a 1Rx8 organisation. The 288-pin form factor matches the board's DIMM slots exactly.

Suits servers needing registered ECC memory.

Registered ECC RDIMMs are required for multi-socket server platforms that rely on buffered architecture and error correction. Standard desktop motherboards cannot use registered modules and will not post with this kit installed.

288-pin RDIMM form factor decides fit

The Supermicro H14DSG-OD only accepts 288-pin registered DDR5 DIMMs. UDIMM or SODIMM variants are physically and electrically incompatible, so the registered RDIMM form factor is the single specification that determines whether this kit will work.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,483.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $25.87 per GB
Pricier than about 71% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-618K6
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 6 × 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 6x16GB DDR5 4800 kit install cleanly alongside existing registered ECC modules on a Supermicro H14DSG-OD?

The kit matches the board's required 288-pin RDIMM form factor, 1.1V voltage, CL40 timing and 1Rx8 rank, so it will be recognised at full 96GB capacity and run at DDR5 4800 speed when populated per the manual.

How can I verify the 96GB DDR5 4800 kit is running at its rated 4800 MT/s with ECC active after installation?

Enter the BIOS or use a tool like dmidecode to confirm each slot shows 16GB DDR5 4800, 1Rx8 Registered ECC, 1.1V and CL40, and that the memory controller reports ECC enabled.

Does the 96GB 6x16GB DDR5 4800 RDIMM kit include heat spreaders or any extra cables?

The package contains only the six 16GB 288-pin RDIMM modules; no heat spreaders, cables or additional accessories are included.

More in Model-Specific Memory Upgrades

Similar items