We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 192GB 2x96GB CL46 ECC RDIMM memory upgrade

SKU CH-4BYH-CPXVX

192 GB DDR5-5600 ECC registered RDIMM kit (2 × 96 GB, CL46, 1.1 V) validated for the Gigabyte MZ33-AR1 server motherboard

  • Total capacity192 GB (2 × 96 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 192GB 2X96GB

Show 24 more
  • 192 GB total capacity from two 96 GB modules for maximum memory density
  • DDR5 5600 speed with CL46 latency delivers rated server performance
  • Registered ECC architecture corrects single-bit errors for data integrity
  • 1 V operation at 2Rx4 rank matches motherboard memory controller expectations
  • 288-pin RDIMM form factor verified compatible with GIGABYTE MZ33-AR1

192GB DDR5 5600 ECC RDIMM kit

This 192GB kit contains two 96GB DDR5 5600 Registered ECC RDIMMs built for the GIGABYTE MZ33-AR1 motherboard. Each module runs at 1.1V with CL46 timing and a 2Rx4 rank layout that matches the board's memory controller expectations. It targets server and workstation builders who need maximum registered capacity in a two-slot configuration.

DDR5 5600 RDIMM limits

DDR5 5600 (PC5-44800) sets the maximum data rate the modules can reach when the platform supports it. Registered DIMMs add a clock cycle of buffering so the memory controller can drive every slot at full population, but the board's own population rules still decide how many ranks per channel are allowed. ECC corrects single-bit errors on the fly yet cannot fix multi-bit failures.

Verify MZ33-AR1 memory rules

Check the GIGABYTE MZ33-AR1 manual for the approved DIMM population order, maximum supported capacity per slot, and any BIOS version required for 96GB RDIMMs. Confirm the board accepts 2Rx4 Registered ECC modules at DDR5 5600 before ordering. Ensure the 288-pin RDIMM form factor matches the installed slots — UDIMM or SODIMM variants will not fit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $6,023.99
Pricier than about 81% of the 21,161 comparable items (median $397.99).
Total capacity 192 GB (2 × 96 GB)
Higher than about 75% of the 20,941 comparable items (median 32 GB).
Price per GB $31.37 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K2
Total capacity192 GB (2 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items192 GB 2 × 96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Should I choose the 192GB 2x96GB kit or a different capacity for my GIGABYTE MZ33-AR1?

This kit provides exactly 192GB as two 96GB modules, matching the board's DDR5 5600 registered ECC requirement and populating two slots at the rated speed.

What does the DDR5 5600 speed mean once installed in the MZ33-AR1?

The modules will run at 5600 MT/s with CL46 latency at 1.1V, delivering the full PC5-44800 bandwidth the motherboard's memory controller expects when fully populated.

How does the 288-pin RDIMM interface and registered ECC design affect real-world operation?

The registered buffer reduces electrical load on the memory controller so both DIMMs operate at 5600 MT/s, while ECC corrects single-bit errors on the fly to prevent silent data corruption.

More in Model-Specific Memory Upgrades

Similar items