We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 576GB (12x48GB) ECC RDIMM CL46 1.1V 2Rx8 memory upgrade for GIGABYTE MA34-CP0

SKU CH-T5VP-Q3WSC

576 GB DDR5-5600 ECC registered kit in twelve 48 GB modules at CL46 and 1.1 V, validated for the GIGABYTE MA34-CP0 motherboard

  • Total capacity576 GB (12 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 576GB 12X48GB

Show 24 more
  • 576GB total capacity from twelve 48GB modules for memory-intensive server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on the GIGABYTE MA34-CP0
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1V operating voltage matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the board's required DIMM slots without adapters

NEMIX RAM DDR5 5600 576GB Kit

This 576GB kit consists of twelve 48GB DDR5 5600 Registered ECC RDIMMs built for the GIGABYTE MA34-CP0 motherboard. It targets servers and workstations that require maximum registered memory capacity with error correction. The modules operate at 1.1V with CL46 timing and a 2Rx8 organisation. Buyers needing unbuffered UDIMMs or non-ECC memory should look elsewhere.

Capacity and Headroom

Twelve 48GB ranks deliver 576GB total, allowing heavily virtualised hosts or in-memory databases to run large working sets without swapping. Registered buffering lets every slot stay populated at full speed, while ECC corrects single-bit errors before they affect production workloads. The kit stops at 576GB; systems requiring more memory per socket or higher frequencies will exceed this module's rated limits.

DDR5 5600 PC5-44800 Interface

The DDR5 5600 (PC5-44800) interface provides the bandwidth ceiling for this kit, and the registered RDIMM protocol is mandatory for the target motherboard. Mixing with unbuffered DIMMs or different speeds will prevent the system from posting at the rated frequency. The 288-pin form factor fits only DDR5 RDIMM slots; it cannot be used in UDIMM or SODIMM platforms.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $14,709.99
Pricier than about 90% of the 21,161 comparable items (median $397.99).
Total capacity 576 GB (12 × 48 GB)
Higher than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $25.54 per GB
Pricier than about 70% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K12
Total capacity576 GB (12 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items576 GB 12 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will the 2Rx8 registered ECC DDR5-5600 modules work if I keep some older RDIMMs in the other slots?

Mixing ranks or speeds is not recommended. The board's population rules expect identical 2Rx8 registered ECC modules at 5600 MT/s and 1.1 V; adding different DIMMs can prevent full-capacity recognition or force a lower common speed.

How can I verify the 12-module kit is running at the rated 5600 MT/s CL46 after installation?

Enter the BIOS and confirm the memory frequency shows 5600 MT/s with CL46 timings, then run a full memory diagnostic to ensure all 576 GB are detected without errors.

Does the kit include anything besides the twelve 48 GB 288-pin RDIMMs, and do I need extra parts?

The package contains only the twelve 48 GB DDR5-5600 ECC registered RDIMMs. No heat spreaders, cables, or tools are included, and none are required for installation.

More in Model-Specific Memory Upgrades

Similar items