We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board 288 pin DDR5 RDIMM memory module no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 96GB ECC RDIMM 2Rx4 CL46 1.1V GIGABYTE MZ73-LM2 memory upgrade

SKU CH-6NCD-024QK

96GB DDR5-5600 registered ECC RDIMM with CL46 latency and 1.1V operation, built for the GIGABYTE MZ73-LM2 motherboard

  • Total capacity96 GB
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB

Show 24 more
  • 96 GB capacity lets your GIGABYTE MZ73-LM2 handle large workloads without swapping
  • DDR5 5600 speed delivers PC5-44800 bandwidth for data-intensive applications
  • ECC and registered design correct single-bit errors and reduce controller load in fully populated servers
  • CL46 latency at 1.1 V balances responsive timing with efficient power use
  • 288-pin 2Rx4 RDIMM form factor matches the board's exact slot and population requirements

96GB DDR5 ECC RDIMM for GIGABYTE MZ73-LM2

This 96GB DDR5-5600 registered ECC module is built for the GIGABYTE MZ73-LM2 motherboard. It delivers the exact rank, voltage and timing the board's memory controller expects so the full capacity is recognised at rated speed. It suits administrators upgrading or repairing that specific server platform.

Registered 288-pin form factor

The registered architecture buffers address and command signals, letting every slot run fully populated without overloading the memory controller. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The 288-pin RDIMM keying fits only boards wired for registered DDR5; it will not work in UDIMM or SODIMM slots.

CL46 at 1.1V defines the compatibility window

The module operates at CL46 latency and 1.1V, matching the JEDEC DDR5-5600 (PC5-44800) specification the MZ73-LM2 requires. If your board demands different timings, voltages or a non-registered layout, this kit will not post or will down-clock. Verify the manual's approved DIMM population order before purchase.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,767.99
Pricier than about 72% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $28.83 per GB
Pricier than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-9624K1
Total capacity96 GB
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items96 GB DDR5 5600 MHz PC5-44800 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Does the DDR5 5600 PC5-44800 interface cap the module at 5600 MT/s even if the board supports faster speeds?

Yes, the module is rated at 5600 MT/s (PC5-44800) with CL46 latency and 1.1 V, so it will run at that speed unless the platform downclocks it.

Will the 288-pin ECC Registered RDIMM fit the GIGABYTE MZ73-LM2 motherboard DIMM slots?

The 288-pin RDIMM form factor matches the MZ73-LM2's registered DIMM slots; UDIMM or SODIMM modules will not fit.

What is the correct installation step for the 2Rx4 registered ECC kit on the MZ73-LM2?

Follow the motherboard manual's population order for registered DIMMs; the common mistake is inserting modules in the wrong slot sequence for the specific CPU configuration.

More in Model-Specific Memory Upgrades

Similar items