We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black chips and gold edge connectors lying side by side

NEMIX RAM

NEMIX RAM DDR5 5600 CL46 96GB (2x48GB) UDIMM for Supermicro X13SAE memory upgrade

SKU CH-PM6G-RDJP9

A 96 GB DDR5 kit with two 48 GB UDIMMs rated at 5600 MT/s, CL46 and 1.1 V, validated for the Supermicro X13SAE motherboard

  • Total capacity96 GB (2 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeUnbuffered

Size 96GB 2X48GB

  • 96 GB capacity from two 48 GB modules doubles your desktop memory headroom
  • DDR5-5600 speed with CL46 latency delivers rated bandwidth for Supermicro X13SAE
  • 10 V operation at 2Rx8 rank matches the motherboard memory controller expectations
  • Major OEM Samsung Micron Hynix chips tested for stability at rated speed and timing
  • 288-pin unbuffered UDIMM form factor fits the exact slot type your board requires

96GB DDR5 kit for Supermicro X13SAE

This 96GB kit contains two 48GB DDR5 UDIMM modules rated at 5600MHz with CL46 latency and 1.1V operation. It is built as an exact-match upgrade for the Supermicro X13SAE motherboard using major OEM chips from Samsung, Micron or Hynix. The non-ECC unbuffered design suits desktop and workstation platforms that require standard UDIMM population.

Installation fits standard 288-pin DDR5 slots

Each module uses the 288-pin UDIMM form factor and installs like any desktop DIMM; no heat spreader is fitted so clearance is minimal. The kit is validated for the X13SAE memory-population rules so the board recognises the full 96GB at rated speed. Builders should still consult the motherboard manual for approved slot order and maximum supported capacity before fitting.

DDR5-5600 bandwidth and density limits

The PC5-44800 rating delivers 5600MT/s transfer rates at CL46, which is the baseline JEDEC speed for this generation. Two-rank 2Rx8 organisation allows the 48GB density per module but does not increase per-pin bandwidth beyond the standard. Systems that cannot train at 5600MT/s will fall back to lower JEDEC speeds, and total capacity is capped by the board's memory-controller limits.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $1,287.99
Pricier than about 63% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (2 × 48 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $13.42 per GB
Pricier than about 60% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Memory
Model nameDDR5 Non-ECC Unbuffered UDIMM Memory
Part numberMD44800-4828K2
Total capacity96 GB (2 × 48 GB)
Product type288-Pin DDR5 UDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 2 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN Non-ECC UDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How can I verify the kit runs at DDR5 5600 CL46 after installation?

Enter the BIOS and confirm the memory frequency reads 5600 MHz with CAS latency 46; the modules operate at 1.1 V so the voltage should also show 1.10 V.

What is included in the package and do I need any extra parts?

The box contains two 48 GB DDR5 5600 UDIMMs for a total of 96 GB; no heat spreader or additional cables are supplied and nothing else is required for installation.

Why choose the 96 GB 2x48 GB version instead of a smaller kit?

This 96 GB kit (2 x 48 GB) matches the Supermicro X13SAE's supported capacity and population rules, delivering the full 96 GB in two 288-pin UDIMM slots.

More in Model-Specific Memory Upgrades

Similar items