We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 288GB (6×48GB) CL46 1.1V 2Rx8 memory upgrade for GIGABYTE MZ73-LM0

SKU CH-Y334-BSMZK

288 GB DDR5 5600 registered ECC kit with six 48 GB modules at CL46 and 1.1 V for GIGABYTE MZ73-LM0 servers

  • Total capacity288 GB (6 × 48 GB)
  • Rated speedDDR5 5600 (PC5 44800)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL46
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 288GB 6X48GB

Show 24 more
  • 288 GB total capacity from six 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput for the GIGABYTE MZ73-LM0
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the platform specification for stable full-population operation
  • Built with major OEM Samsung, Micron or Hynix DRAM chips for enterprise reliability

Exact-match DDR5 server kit

This 288GB kit contains six 48GB DDR5-5600 RDIMM modules built to the exact rank, voltage and timing the GIGABYTE MZ73-LM0 memory controller expects. It installs as a matched set so the board recognises the full capacity at rated speed.

Registered ECC RDIMM form factor

The modules use 288-pin Registered ECC DDR5 with a 2Rx8 organisation and 1.1V operation, the only form factor and electrical interface this motherboard accepts for full-population stability. A UDIMM or SODIMM will not fit or function.

Six-slot capacity for dense workloads

Six populated slots deliver 288GB of error-correcting memory, enough for heavily virtualised hosts, large in-memory databases or HPC nodes that must run every channel at maximum density. Workloads needing more than 288GB or a different DIMM type will require a different platform.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $7,628.99
Pricier than about 84% of the 21,161 comparable items (median $397.99).
Total capacity 288 GB (6 × 48 GB)
Higher than about 81% of the 20,941 comparable items (median 32 GB).
Price per GB $26.49 per GB
Pricier than about 73% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR44800-4828K6
Total capacity288 GB (6 × 48 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 5600 (PC5 44800)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL46
ECC supportYes
Buffer typeRegistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items288 GB 6 × 48 GB DDR5 5600 MHz PC5-44800 2Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

How does the 5600 MT/s speed translate once the modules are installed in the GIGABYTE MZ73-LM0?

The kit runs at DDR5-5600 with CL46 latency and 1.1 V, delivering the rated transfer rate when the motherboard's memory controller is fully populated with all six RDIMMs.

What does the PC5-44800 designation limit in everyday use?

PC5-44800 is the JEDEC standard name for DDR5-5600; it defines the maximum data rate the DIMMs are qualified for and the timing parameters the firmware will apply.

What physical slot and clearance requirements should I check before fitting the 48 GB RDIMMs?

Each module is a 288-pin DDR5 RDIMM without a heat spreader, so it fits the standard RDIMM slots on the MZ73-LM0 and needs only the normal DIMM height clearance.

More in Model-Specific Memory Upgrades

Similar items