We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 96GB 6x16GB 4800MHz CL40 1.1V ECC RDIMM Supermicro H14DSG-OM

SKU CH-NSJX-8WRMH

96GB DDR5 server kit with six 16GB ECC registered modules running at 4800MHz CL40 1.1V for Supermicro H14DSG-OM

  • Total capacity96 GB (6 × 16 GB)
  • Rated speedDDR5 4800 (PC5 38400)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL40
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 96GB 6X16GB

Show 30 more
  • 96 GB total capacity lets you fully populate six slots
  • DDR5 4800 speed with CL40 latency runs at rated frequency
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the motherboard's memory-controller requirements
  • Verified fitment for the Supermicro H14DSG-OM motherboard

Exact-match 96 GB DDR5 kit

This 96 GB kit contains six 16 GB DDR5-4800 registered ECC RDIMMs built to the precise 1Rx8 rank, 1.10 V voltage and CL40 timing the Supermicro H14DSG-OM memory controller expects. Each 288-pin module uses major-brand Samsung, Micron or Hynix chips and carries no heat spreader.

Suited for fully populated H14DSG-OM servers

Administrators who need every DIMM slot filled at rated speed with registered ECC stability will find this kit verified for that board. Builders using desktop boards, workstations that require unbuffered UDIMMs, or systems limited to lower capacities should select memory matched to those platforms.

Straightforward registered DIMM installation

Align the 288-pin key notch, press each module vertically until the retention clips lock, and follow the motherboard manual for the approved population sequence. Common issues arise when slots are filled in the wrong order, when unbuffered DIMMs are mixed with registered modules, or when the BIOS is not updated to support the full 96 GB configuration.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $2,555.99
Pricier than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 96 GB (6 × 16 GB)
Higher than about 65% of the 20,941 comparable items (median 32 GB).
Price per GB $26.62 per GB
Pricier than about 74% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR38400-618K6
Total capacity96 GB (6 × 16 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 4800 (PC5 38400)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL40
ECC supportYes
Buffer typeRegistered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsSupermicro
In the box
Included items96 GB 6 × 16 GB DDR5 4800 MHz PC5-38400 1Rx8 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Will my Supermicro H14DSG-OM motherboard recognise all six 1Rx8 DDR5 RDIMMs at full 96GB capacity?

Yes, the kit matches the board's required 288-pin registered DDR5-4800 1.1V CL40 specification so the memory controller detects every module at rated speed and capacity.

Can I mix these 1.1V DDR5 RDIMMs with older DDR5 modules that run at a different voltage?

No, the motherboard supplies a single 1.1V rail for all DDR5 slots; mixing voltages prevents the system from training memory correctly and will cause boot failures.

How do I confirm the ECC registered RDIMMs are actively correcting errors after installation?

Check the BIOS memory information screen for ECC status 'Enabled' and review the IPMI or OS logs for corrected error counters incrementing during operation.

More in Model-Specific Memory Upgrades

Similar items