We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules without heat spreaders, 288-pin, 384GB kit

NEMIX RAM

NEMIX RAM MR51200-9624K4 384GB 4x96GB DDR5 6400 CL52 ECC RDIMM memory upgrade

SKU CH-SSQ5-004CJ

A 384 GB DDR5-6400 ECC registered quad-kit using 2Rx4 1.1 V CL52 modules validated for the GIGABYTE MA34-CP0 motherboard

  • Total capacity384 GB (4 × 96 GB)
  • Rated speedDDR5 6400 (PC5 51200)
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • CAS latencyCL52
  • Rated voltage1.1 V
  • Buffer typeRegistered

Size 384GB 4X96GB

Show 24 more
  • 384 GB total capacity for large workloads from four 96 GB modules
  • DDR5 6400 speed with CL52 latency at 1.10 V for rated performance
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • 288-pin RDIMM form factor matches the GIGABYTE MA34-CP0 motherboard requirements
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability

384 GB DDR5-6400 ECC RDIMM kit

This NEMIX RAM kit delivers 384 GB across four 96 GB DDR5-6400 registered DIMMs. Each module runs at 1.1 V with CL52 latency and a 2Rx4 organisation. The 288-pin RDIMM form factor and ECC registration match the requirements of the GIGABYTE MA34-CP0 motherboard.

Suited for the GIGABYTE MA34-CP0 platform

Builders populating all four slots on a GIGABYTE MA34-CP0 board with registered ECC memory will find the exact rank, voltage and timing the controller expects. Systems that require unbuffered UDIMMs, SODIMMs or non-ECC modules cannot use this kit.

Registered ECC stability for full-slot population

The registered architecture reduces electrical load on the memory controller, allowing all four slots to run at the rated 6400 MT/s. On-board ECC corrects single-bit errors in real time. Confirm the motherboard manual for approved population order and maximum supported capacity before installation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $11,845.99
Pricier than about 90% of the 21,161 comparable items (median $397.99).
Total capacity 384 GB (4 × 96 GB)
Higher than about 85% of the 20,941 comparable items (median 32 GB).
Price per GB $30.85 per GB
Pricier than about 88% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNEMIX RAM
Product lineNEMIX RAM Original Series Server Memory
Model nameDDR5 ECC RDIMM Registered Server Memory
Part numberMR51200-9624K4
Total capacity384 GB (4 × 96 GB)
Product type288-Pin DDR5 RDIMM
Performance
Rated speedDDR5 6400 (PC5 51200)
Processor
ChipsetMajor OEM Samsung, Micron, Hynix
Memory
CAS latencyCL52
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.1 V
Compatibility
Compatible systemsGIGABYTE
In the box
Included items384 GB 4 × 96 GB DDR5 6400 MHz PC5-51200 2Rx4 1.1 V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Questions about this item

Which motherboard must I already have for this 384GB DDR5 6400 kit to be recognised at full capacity?

The kit is verified for the GIGABYTE MA34-CP0 motherboard; its 288-pin RDIMM form factor and 1.10V operation match that board's memory-population rules exactly.

If I keep older DDR5 modules rated at a different speed, how will this CL52 6400MHz kit behave alongside them?

All installed DIMMs will run at the lowest common speed and latency; mixing ranks or timings can prevent the server from posting or force downclocking below 6400MHz.

After installing the four 96GB RDIMMs, what should I check in the BIOS to confirm the kit is running as intended?

Verify the memory info screen shows 384GB total, DDR5-6400 (PC5-51200), CL52, 1.10V, registered ECC mode, and all four slots populated in the order the MA34-CP0 manual specifies.

More in Model-Specific Memory Upgrades

Similar items