Nippon Labs 30P-10W1-161413Y-14 power splitter cord 14" C14 to C13 x2 16 AWG

Power distribution for rack equipment

This 14 inch splitter connects one IEC-60320-C14 inlet to two IEC-60320-C13 outlets, letting a single PDU or UPS socket feed two devices. The 16 AWG SJT conductors are rated for 13 A at 250 V and carry UL listing plus RoHS and REACH compliance. It suits administrators who want to consolidate power feeds in a cabinet without adding bulk.

Replaces twin cords from one source

Instead of running two separate C14-to-C13 leads from a power strip, this Y cable halves the cord count while keeping each leg fully moulded for strain relief. The jump is worthwhile when rack depth is tight and cable management arms are already crowded with data cables. Builders who need more than two branches from one inlet should look at a multi-outlet strip instead.

Steady load on both branches

Under continuous dual-device draw the 16 AWG copper and SJT jacket maintain temperature within spec because the 13 A rating applies to the combined load. The fully moulded connectors resist loosening from vibration in a data centre aisle. Installations that regularly approach the ampere limit should verify the upstream breaker and PDU rating rather than relying on the cord alone.