We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 3ft power extension cord with moulded C14 to C13 connectors

Nippon Labs

Nippon Labs 30POW-10W1-14-02203 computer power extension cord 3ft 14AWG C14 to C13 black

SKU CH-QW4H-056PD MPN 30POW-10W1-14-02203

A 3 ft 14 AWG extension cable with IEC-60320-C14 to IEC-60320-C13 connectors, rated 15A/250V, fully moulded for durability and UL, cUL and CSA approved

  • Connector count2
  • Conductor gauge14 AWG
  • Conductor typeUL SJT 14 AWG. x 3C
  • Product typeExtension Cable
  • Product colorBlack
  • Overall length3 ft (0.91 m)
  • Extend reach by three feet with a 14 AWG extension
  • Heavy-duty 14 AWG conductors handle 15 A at 250 V
  • Fully moulded C14-to-C13 ends resist strain and wear
  • UL, cUL and CSA approvals confirm safety compliance
  • RoHS and REACH compliant materials reduce hazardous substances

Three-foot reach for rack gear

This three-foot extension cord connects a C14 inlet to a C13 outlet, letting you bridge the gap between a server, switch or workstation and a nearby PDU or UPS. The 14 AWG conductors are rated for 15 amps at 250 volts and carry UL, cUL and CSA approvals plus RoHS and REACH compliance. The fully moulded SJT jacket resists wear in dense cabinet runs.

Replaces short factory leads

When the stock cable on a power supply or appliance falls short of the rack’s vertical PDU, this cord adds the missing length without stacking adapters. It is worth the swap whenever the existing lead is 14 AWG or thinner and the run stays within three feet, keeping voltage drop negligible for typical 15-amp loads.

Handles 15-amp continuous draw

The 14 AWG copper handles a full 15-amp continuous load at 250 volts, so it powers most single-supply servers, storage arrays and network gear without headroom concerns. It runs out of reach for equipment mounted farther than three feet from the power strip, and it cannot serve devices that demand a heavier gauge or a different connector standard.

How it compares

Measured against everything we stock in PC & Server Extension Cords, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 75% of the 401 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model name30POW-10W1-14-02203
Product typeExtension Cable
Product colorBlack
Ports & slots
Connector count2
Size & build
Overall length3 ft (0.91 m)
Conductor gauge14 AWG
Conductor typeUL SJT 14 AWG. x 3C
Shipping weight0.16 kg
Package size203 × 152 × 20 mm

Questions about this item

Will the 14 AWG SJT cable and moulded C14 plug fit side-by-side in a high-density PDU strip?

The cord uses a standard IEC-60320-C14 plug on a 14 AWG SJT jacket; it fits any C13 outlet, but allow enough rear clearance for the moulded body and the cable bend radius in tight rows.

What is the correct orientation when plugging the C14 end into a UPS and the C13 end into a server?

Insert the C14 connector into the UPS or PDU outlet and the C13 connector into the device inlet; both are keyed so they only go in one way — do not force them or the pins can bend.

How often should I inspect or replace this 3 ft 14 AWG extension cord in a data-centre rack?

Visually check the moulded connectors and SJT jacket during routine rack audits; replace the cord if you see cracks, discoloration, overheating marks or if the retention clips no longer hold securely.

More in PC & Server Extension Cords

Similar items