STARTECH USB312SAT3CB USB 3.1 Gen 2 to SATA converter cable 2.5
- 2.5 in (6.35 cm)
- USB to SATA
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Adds a wired Gigabit Ethernet port to USB-C devices that support DP Alt Mode or Thunderbolt 3, delivering up to 5 Gbps bandwidth without extra drivers
The Nippon Labs 30UC-CGB connects a USB 3.1 Type-C port to an RJ-45 Gigabit Ethernet jack. It is intended for laptops, tablets or smartphones whose USB-C socket supports DP Alt Mode or Thunderbolt 3. An Ethernet cable is required to complete the link. The white adapter adds a wired network option where Wi-Fi is unavailable or undesired.
The adapter negotiates 10, 100 or 1000 Mbps Ethernet speeds and uses the USB 3.1 5 Gbps pipe for data transfer. Because the bus bandwidth exceeds the Gigabit line rate, the link can maintain full wire speed during long file copies or streaming sessions without the thermal throttling sometimes seen on lesser USB 2.0 dongles. No driver installation is needed on supported operating systems.
Before ordering, confirm that the host device’s USB-C implementation includes DisplayPort Alternate Mode or Thunderbolt 3; a plain USB 2.0 or power-only Type-C port will not pass Ethernet traffic. The product documentation lists compatible models from Apple, Dell, ASUS, Lenovo, HP, Huawei, Samsung and others, but the list is not exhaustive. Check the manufacturer’s specifications for your exact device.
Measured against everything we stock in USB Adapter Cables & Dongles, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Nippon Labs |
| Model name | 30UC-CGB |
| Product type | USB 3.1 Type-C to Gigabit Ethernet |
| Product color | White |
| Adapter type | USB to Ethernet |
| Ports & slots | |
| First connector | USB 3.1 Type-C Male |
| Second connector | RJ-45 (Gigabit Ethernet) |
| Size & build | |
| Shipping weight | 0.04 kg |
| Package size | 244 × 157 × 18 mm |
The adapter draws power only from the USB-C port and has no fan, so heat output stays low during continuous 10/100/1000 Mbps use.
Yes, the host device must provide a USB 3.1 Type-C port with DP Alt Mode or Thunderbolt 3; plain USB 2.0-C ports will not activate the Gigabit Ethernet link.
Both models are listed as compatible and the adapter requires no extra driver software on macOS or Windows.
More in USB Adapter Cables & Dongles
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?