We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten short black Cat6 patch cables with snagless boots and gold RJ45 plugs

Nippon Labs

Nippon Labs 60CAT6-0.5BK-10P network ethernet cable Cat6 0.5 ft 10 pack black

SKU CH-T9HK-682D3 MPN 60CAT6-0.5BK-10P

Ten 0.5 ft Cat6 UTP patch cables with gold-plated RJ45 connectors and snagless boots

  • Cable categoryCat6
  • First connectorRJ45
  • Second connectorRJ45
  • ShieldingUnshielded Twisted Pair
  • Conductor gauge24 AWG
  • Product typeNetwork Ethernet Cables
  • Ten cables keep a rack tidy with short links
  • 5 ft length avoids slack in dense patch panels
  • Cat6 UTP rated for gigabit speeds in home and office
  • Gold-plated RJ45 contacts resist corrosion for reliable signal
  • Snagless boots protect locking tabs during frequent moves

Ten-pack of short Cat6 patch cables

This pack contains ten Category 6 patch cables, each measuring .5 ft. They are built for home and office network connections where only a very short link is required. The cables suit builders wiring patch panels, switches or cable modems inside a single rack or desk enclosure. Buyers needing longer runs for room-to-room cabling should choose a different length.

UTP construction with gold-plated RJ45 plugs

Each cable uses four twisted pairs of 24 AWG stranded bare copper inside a PVC jacket. Both ends carry RJ45 connectors with 50 micron gold-plated contacts and a snagless boot that protects the locking tab. The unshielded design keeps the cable flexible for tight routing, while the T568B wiring ensures compatibility with standard Gigabit Ethernet ports. No shield drain wire is present, so the cables do not require grounded patch panels.

UL and ETL verified for safety and performance

The cables comply with TIA/EIA-568-C.2 Cat.6 standards and carry UL and ETL verification. They also meet RoHS requirements. In normal use the PVC jacket and low-voltage conductors produce no measurable heat or audible noise. Power draw is limited to the negligible PoE current carried by connected devices, so the cables add no thermal load to a rack or cabinet.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $19.99
Pricier than about 62% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippin Labs
Model name60CAT6-0.5BK-10P
Product typeNetwork Ethernet Cables
Product colorBlack
Connectivity
Cable categoryCat6
Ports & slots
First connectorRJ45
Second connectorRJ45
Size & build
Overall length0.5 ft (0.15 m)
ShieldingUnshielded Twisted Pair
Conductor gauge24 AWG
Shipping weight0.45 kg
Package size152 × 127 × 51 mm

Questions about this item

Does the 0.5 ft length limit where I can place devices in a rack?

At 0.5 ft the cable only reaches equipment that sits side by side or in the same rack unit, so plan device positions before installing.

Will the PVC jacket and 24 AWG conductors get warm when PoE runs continuously?

The 24 AWG stranded copper and PVC jacket are rated for normal PoE loads; no extra heat is expected under typical daily operation.

Do my switch and router need RJ45 ports wired to the T568B standard?

Yes, both ends use RJ45 plugs terminated to the T568B wiring scheme, so the connected ports must follow that pinout.

More in Ethernet & LAN Cables

Similar items