Nippon Labs 60CAT6-1BK-10P Cat6 network ethernet cable 1 ft 10 pack black 24AWG UTP

Ten-pack Cat6 patch cables

This ten-pack of Cat6 patch cables supplies short, one-foot links for dense rack or desk installations. Each cable uses 24 AWG stranded bare copper in a four-pair UTP construction with a PVC jacket. RJ45 plugs carry 50 micron gold-plated contacts and snagless molded boots to protect locking tabs. The cables comply with TIA/EIA-568-C.2 and are UL and ETL verified.

Check port spacing and wiring standard

Verify that one-foot lengths reach between your devices without tension, as longer runs will need different cables. Confirm your equipment uses RJ45 connectors wired to the T568B pinout, which these cables follow. Ensure the unshielded design matches your environment, since shielded cable may be required near strong EMI sources. No tooling is needed beyond a standard RJ45 port.

Thermals noise and power draw

Passive copper cables generate no heat, produce no audible noise and draw no power during normal operation. The PVC jacket and stranded conductors remain flexible at typical indoor temperatures. Gold-plated contacts resist oxidation to maintain low contact resistance over time. Performance stays within Cat6 limits for the full one-foot length.