Nippon Labs 60CAT6-7BK-10P network ethernet cable Cat6 UTP 7 ft black 24 AWG RJ45 10 pack

Cat6 UTP patch cable 10-pack

This pack supplies ten Category 6 UTP cables, each seven feet long, for wiring workstations, routers, patch panels, cable modems and switches in home or office networks. The stranded 24 AWG bare-copper conductors and RJ45 plugs with 50 micron gold-plated contacts follow the T568B wiring standard. A snagless bubble boot protects the locking tab on every connector. The PVC jacket meets UL and ETL verification plus RoHS compliance.

Sustained signal integrity

Cat6 construction maintains the specified bandwidth over the full seven-foot run during continuous data transfer, avoiding the drop-off that shorter-spec cables can exhibit under prolonged load. The four twisted pairs reduce crosstalk so that throughput remains stable across extended file moves, backups or streaming sessions. Gold-plated contacts resist oxidation, keeping contact resistance low over many mating cycles. UL-verified TIA/EIA-568-C.2 compliance confirms the cable meets the published performance envelope.

Thermal noise and power profile

Passive copper cables generate no heat, draw no power and produce no acoustic noise, so they add nothing to the thermal or acoustic budget of a rack or desk installation. The PVC jacket remains flexible at normal indoor temperatures, allowing tidy routing without kinking. Because the assembly is unshielded, it does not require grounding and introduces no ground-loop risk. The only operational consideration is avoiding tight bends that could deform the twisted pairs.