Nippon Labs 60CAT6A-10PU Cat6A UTP network ethernet cable 10 ft Purple 24 AWG

Cat6A UTP cable for 10 GbE links

This 10 ft purple patch cable uses four pairs of 24 AWG stranded pure copper in an unshielded twisted-pair construction. Both ends carry RJ45 plugs with 50 micron gold-plated contacts and follow the T568B wiring standard. The CM-rated PVC jacket meets UL and ETL verification of TIA/EIA compliance and is RoHS compliant. It is rated for a minimum frequency of 500 MHz and supports 10 Gigabit Ethernet over distances up to 100 meters.

Suited for 10 Gigabit copper runs.

Installers who need a verified Cat6A UTP link for 10Base-T through 10000Base-T will find the 550 MHz bandwidth headroom and crosstalk suppression useful for PoE heat dissipation. Buyers who require shielded or foil-wrapped cable for high-EMI environments should look at something else because this jacket is unshielded. The fixed 10 ft length also means anyone needing longer or shorter pre-terminated runs must choose a different SKU.

Verify port spacing and jacket rating before

Check that the RJ45 boots clear adjacent ports on your switch or patch panel, especially in high-density 1U panels where staggered boots can block neighbours. Confirm that CM-rated PVC satisfies your local fire code for in-wall or plenum routing; this cable is not rated CMP or CMR. Ensure the 10 ft reach matches the distance between your devices without excess slack that could strain the connectors.