We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 15 ft Cat 6A UTP Ethernet cable with booted RJ45 connectors

Nippon Labs

Nippon Labs 60CAT6A-15WT network ethernet cable 15 ft Cat 6A white

SKU CH-4V7J-GGGZ6 MPN 60CAT6A-15WT

A 15 ft Cat 6A UTP patch cable with RJ45 connectors rated for 10 Gigabit Ethernet at 500 MHz

  • Cable category6A
  • First connectorRJ45
  • Second connectorRJ45
  • Conductor gauge24 AWG
  • Product typeNetwork Ethernet Cables
  • Overall length15 ft (4.57 m)
  • Supports 10 Gigabit Ethernet up to 100 metres
  • Operates at a minimum frequency of 500 MHz
  • Gold-plated contacts and snagless boots resist corrosion
  • 24 AWG stranded pure copper conductors enhance signal quality
  • Compliant with TIA/EIA standards verified by UL and ETL

Cat 6A cable for 10 Gigabit Ethernet

This Cat 6A patch cable supports 10 Gigabit Ethernet up to 100 meters with a 500 MHz minimum frequency. It uses 24 AWG stranded pure copper conductors in an unshielded twisted pair design. Gold-plated RJ45 contacts and molded strain-relief boots provide durable connections. The 15-foot white cable follows T568B wiring and meets TIA/EIA standards with UL and ETL verification.

Suited for short 10Gbps links not requiring

The unshielded construction suits typical home and office runs where alien crosstalk is low. Buyers needing shielded cable for noisy environments or outdoor burial should look elsewhere. The fixed 15-foot length does not fit installations requiring longer or custom-cut runs. PoE devices benefit from the 550 MHz rating and improved heat dissipation.

500 MHz minimum frequency enables 10GBASE-T

Operating at 500 MHz minimum, this cable meets the Cat 6A requirement for 10,000Base-T Ethernet over copper. The 24 AWG pure copper conductors and 550 MHz tested rating support the bandwidth needed for 10 Gigabit speeds. Without this frequency margin, the cable could not guarantee 10Gbps performance over the full 100-meter channel.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $15.99
Typical for this category: the median of 9,945 items is $14.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model name60CAT6A-15WT
Product typeNetwork Ethernet Cables
Product colorWhite
Connectivity
Cable category6A
Ports & slots
First connectorRJ45
Second connectorRJ45
Size & build
Overall length15 ft (4.57 m)
ShieldingNo
Conductor gauge24 AWG
Shipping weight0.30 kg
Package size229 × 178 × 51 mm

Questions about this item

How do I install the 15 ft Cat 6A cable with RJ45 connectors, and what step do people often get wrong?

Plug each RJ45 connector into the matching port until the tab clicks; the step people miss is aligning the keyed tab before pushing, otherwise the latch will not engage and the link drops.

What maintenance or replacement will the 24 AWG stranded copper cable with 50 micron gold-plated contacts need later?

No routine maintenance is required; inspect the molded boots and snagless molds for cracks after moves, and replace the cable only if the jacket is cut or a connector tab breaks.

What limit shows up first under sustained 10 Gigabit Ethernet use on this 15 ft UTP patch cable?

The 500 MHz minimum frequency rating and 100 metre channel limit govern sustained 10,000Base-T performance; at 15 ft the cable is well within spec, so the first limit encountered will be the switch or NIC port speed, not the cable itself.

More in Ethernet & LAN Cables

Similar items