Nippon Labs 60CAT8-10-24WT-10P Cat8 network ethernet cable 10 ft white 24 AWG shielded 2000 MHz

Cat8 cable for 25G and 40G links

This 10 ft Cat8 patch cord is rated for 2 GHz operation and supports 25GBASE-T and 40GBASE-T applications. It targets data-centre switch-to-server links and high-performance LANs where 24 AWG shielded construction is required. The white jacket helps identify runs in dense racks.

Simple RJ45 plug-in with shielded ends

Both ends use standard RJ45 connectors with gold-plated contacts, so installation is a direct plug into any RJ45 port. The S/FTP shielding adds bulk that can make tight bends harder to route and the connectors may not fit recessed ports on some consumer devices. Verify clearance before pulling the cable.

Check port speed and connector spacing

Confirm that your switch, server or router ports are rated for 25 Gbps or 40 Gbps to use the full bandwidth; the cable is backward compatible with slower categories but will not increase their speed. Ensure the RJ45 jacks have enough depth for the shielded plugs and that 10 ft reaches between your equipment without tension.