Nippon Labs 60CAT8-35-24GY network ethernet cable 35 ft Cat 8 24 AWG 2000 MHz 40 Gbps

35 ft Cat 8 shielded cable for 40 Gbps networks

This 35 ft Cat 8 patch cable uses 24 AWG stranded copper conductors with individual foil shields and an overall braid shield to reach 2000 MHz bandwidth. It is built for 25GBASE-T and 40GBASE-T links in data-centre racks or high-speed home runs. Gold-plated RJ45 plugs on both ends provide 50 µm contact plating and a snagless strain-relief boot. The CM-rated PVC jacket is rated for indoor and outdoor use.

Before ordering verify your ports and distance

Confirm that both endpoints have RJ45 jacks and support at least the Cat 6a signalling you need; the cable is backward compatible with Cat5, Cat5e, Cat6, Cat6a and Cat7 equipment. Measure the exact run length so the 35 ft reach covers the path without tension. Ensure the pathway can accept a shielded S/FTP cable with a CM-rated jacket and that any patch panels or keystones accept the cable diameter. No specific switch, router or server model is required beyond standard RJ45 Ethernet ports.

Shielded plugs and jacket change installation

The S/FTP construction with foil on each pair and a braided overall shield reduces alien crosstalk at 2000 MHz, so the link can sustain 40 Gbps where unshielded cables would fail. Gold-plated contacts and a soft-flex push tab make repeated mating reliable in dense patch panels. The snagless boot prevents latch damage when cables are pulled through cable managers. The CM-rated PVC jacket allows the same cable to transition from indoor racks to outdoor conduit without a splice.