We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray ultra-slim Cat6 Ethernet cable with snagless RJ45 connectors, 7 ft long

Nippon Labs

Nippon Labs SLCAT6-28-7GY network ethernet cable 7 ft 28 AWG Cat6 550MHz Gray

SKU CH-85SD-AEPSC MPN SLCAT6-28-7GY

A 7 ft Cat6 patch cable with 28 AWG stranded copper, snagless boots and 550 MHz bandwidth for 10 Gigabit Ethernet

  • Cable category6
  • First connector1 x RJ45
  • Second connector1 x RJ45
  • Conductor gauge28 AWG
  • Product typeNetwork Ethernet Cable
  • Overall length7 ft (2.13 m)
  • Snagless boot protects the latch during frequent reconnects
  • Ultra-slim 28 AWG design fits tight high-density racks
  • Gold-plated RJ-45 contacts resist corrosion for lasting signal quality
  • Pure bare copper conductors deliver reliable 550 MHz bandwidth
  • 7 ft length suits short runs between patch panels and devices

Ultra-Slim Cat6 7 ft patch cable

This seven-foot Cat6 patch cable uses 28 AWG stranded bare-copper conductors and gold-plated RJ45 connectors to deliver 550 MHz bandwidth. The snagless ultra-slim profile reduces bulk in tight racks while maintaining full 10-Gigabit Ethernet capability. It is backward compatible with existing Fast Ethernet and Gigabit Ethernet equipment.

Suited for dense racks and short runs

Builders who need a thin, flexible cable for high-density patch panels, network printers, NAS units or VoIP phones will benefit from the narrow boot design. Installations that require longer distances, outdoor rating or shielded construction should look at a different cable type.

550 MHz bandwidth rating

The 550 MHz specification determines whether the cable can support 10-Gigabit Ethernet over the full seven-foot length. If your network infrastructure demands certified performance above this frequency, a higher-category cable is required.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $10.99
Cheaper than about 70% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameNippon Labs
Model nameSLCAT6-28-7GY
Product typeNetwork Ethernet Cable
Product colorGray
Connectivity
Cable category6
Ports & slots
First connector1 x RJ45
Second connector1 x RJ45
Size & build
Overall length7 ft (2.13 m)
Conductor gauge28 AWG
Shipping weight0.05 kg
Package size221 × 145 × 23 mm

Questions about this item

Will the 28 AWG stranded conductors work reliably with my existing Gigabit switch ports?

Yes, the Cat 6 cable is backward compatible with existing Fast Ethernet and Gigabit Ethernet equipment.

How can I verify the 550 MHz rated cable is delivering 10-Gigabit Ethernet performance after installation?

Run a network speed test between two 10-Gigabit capable devices; sustained throughput near 10 Gbit/s confirms the link is operating at the rated bandwidth.

Does the package include only the 7 ft Gray patch cable with RJ45 connectors, or are couplers or wall plates also supplied?

The box contains the single 7 ft Cat 6 patch cable with gold-plated RJ45 connectors on both ends; no couplers, wall plates or other accessories are included.

More in Ethernet & LAN Cables

Similar items