No Sew Cat6e Ethernet cable 20 ft 600 MHz 23 AWG CMR white

20 ft Cat6e riser cable

This 20 ft Cat6e Ethernet cable is built for installers and network owners who need a riser-rated run between floors or inside walls. The CMR jacket meets commercial fire-safety requirements for vertical pathways. Solid 23 AWG bare copper conductors and an internal spline keep crosstalk low across the full 600 MHz bandwidth. It terminates with standard RJ45 connectors for routers, switches, cameras and PoE devices.

CMR jacket and solid copper core

The riser-rated CMR/CL3R/FPLR sheath resists flame spread in vertical shafts, making it suitable for multi-storey deployments where CM cable is not permitted. A tangle-free outer jacket eases pulling through conduit and around corners during installation. Solid 23 AWG bare annealed copper conductors provide consistent conductivity and mechanical strength for structured-wiring terminations. The cable carries UL/ETL listing and complies with ANSI/TIA 568-2.D, ISO/IEC 11801 and ICEA S-102-700.

Low-loss signal at 600 MHz

The 600 MHz rating supports high-throughput applications such as video surveillance, streaming and PoE without excessive attenuation over the 20 ft length. Solid conductors and the internal spline maintain pair geometry, limiting heat build-up from resistive loss during sustained PoE loads. The heat-resistant jacket material tolerates elevated ambient temperatures in bundled cable runs. RoHS-compliant materials avoid restricted substances throughout the assembly.