OmaiLighting 5m COB LED Strip Light Warm White IP65 24V
- Warm White
- 16.4 ft (5 m)
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 5 m COB LED strip delivering seamless, dot-free cool-white light at 90+ CRI, IP65-rated for wet areas with a flexible silicone sleeve and peel-and-stick mounting
Color Cool White
The OmaiLighting 5 m COB LED strip delivers a continuous line of cool white light without visible dots or hot spots. Chip-on-board technology places LEDs at high density for uniform output and reduced heat buildup. A silicone sleeve protects the circuit and achieves an IP65 rating for wet locations. The 8 mm wide strip (10 mm with sleeve) adheres via peel-and-stick backing and bends around curved surfaces.
Architects and installers needing dot-free illumination for reflective surfaces such as granite or tile will appreciate the 90+ CRI and 180° beam angle. The 24 VDC design supports a maximum run of 16.4 ft from a single feed. Buyers who require an indoor-only IP20 version or a different colour temperature should consider other models in the range.
Each segment can be trimmed at 2.45 in intervals to fit exact lengths. The strip terminates in a 5.5 mm × 2.1 mm female barrel connector and includes a male pigtail adaptor with 22 AWG leads for power supply hookup. Rated for 30000 hours at L70, the fixture is dimmable from 0 to 100 % with a compatible driver.
Measured against everything we stock in LED String & Strip Lights, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Product color | Cool White |
| Size & build | |
| Overall length | 16.4 ft (5 m) |
Other versions of this model
The 24 VDC supply supports a maximum continuous run of 16.4 ft (5 m) before voltage drop requires a new feed.
Allow at least 10 mm of channel or surface width for the sleeved strip; the bare PCB is 8 mm.
Clean the surface thoroughly, peel the liner, press firmly along the full 16.4 ft; the step often missed is wiping with isopropyl alcohol first for lasting adhesion.
More in LED String & Strip Lights
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?