XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4TB PCIe 5.0 x4 NVMe SSD with 14000 MB/s sequential read, 13000 MB/s write and 2400 TBW endurance
The ONEBOOM X500 4TB is an M.2 2280 internal solid-state drive that uses a PCIe 5.0 x4 interface and the NVMe 2.0 protocol. It delivers sequential reads up to 14000 MBps and writes up to 13000 MBps with a 4GB DRAM cache.
This drive suits professionals and enthusiasts who need high bandwidth for large datasets, real-time rendering or fast game loading. Users with older motherboards limited to PCIe 4.0 or 3.0 will not reach the advertised speeds and should consider a Gen4 alternative.
The X500 ships without a heatsink, so sustained peak throughput depends on motherboard-integrated cooling or an aftermarket solution. The 2400 TBW endurance rating and 1.6 W idle power reflect the 3D TLC NAND and DRAM cache configuration.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | ONEBOOM |
| Product line | X500 Series |
| Model name | X500 2280 |
| Part number | X500-4 TB 2280 |
| Total capacity | 4 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 14,000 MB/s |
| Sequential write speed | Up to 13,000 MB/s |
| Random read (4K) | Up to 2043,000 IOPS |
| Random write (4K) | Up to 1963,000 IOPS |
| Storage | |
| NAND flash type | 3D TLC |
| Cache memory | 4 GB DRAM |
| Write endurance | 2400 TB |
| Connectivity | |
| Connection protocol | NVMe 2.0 |
| Ports & slots | |
| Interface type | PCI-Express 5.0 x4 |
| Power | |
| Idle power draw | 1.6 W |
| Active power draw | 11.5 W |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Overall height | 80.0 mm |
| Overall width | 22.0 mm |
| Product depth | 3.58 mm |
| Product weight | 50g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -20 °C to 75 °C |
| Operating humidity range | 5-95% |
| More details | |
| Mean time between failures | 1,000,000 h |
The X500 4TB ships without a heatsink; your motherboard’s M.2 shield or an aftermarket sink is recommended for sustained Gen5 speeds.
A PCIe 5.0 x4 M.2 2280 slot and NVMe 2.0 support are required to reach the rated 14000 MB/s read and 13000 MB/s write.
Idle power is 1.6 W and the drive is rated for 2400 TBW with a 1000000-hour MTBF.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?