OPTOMA NOBO S16E Projector Lamp 200W 2000 Hrs
Genuine compatible replacement projector lamp with a 200W UHP bulb and housing, rated for 2,000 hours of use
- Power rating200 W
- Lamp lifespan2,000 Hrs.
- Product typeProjector Lamp
- Genuine compatible replacement ready for easy installation
- 200W UHP bulb delivers reliable brightness
- 2000 hours lamp life supports extended use
- Manufactured to ISO9001 quality standards
- Fits Optoma EP716 and EP719 models
Genuine Compatible Replacement Lamp
The Optoma NOBO S16E is a new 200W projector lamp module that includes a UHP bulb pre-assembled in its housing. It is manufactured to ISO9001 standards and rated for 2,000 hours of operation. This module fits projectors using the EP716 or EP719 lamp designation.
Suits owners of compatible Optoma projectors
Buyers who require a higher wattage module or a significantly longer rated life should look at alternative lamps. Those whose projectors use a different lamp code will not be able to install this unit. It is not intended for non-Optoma hardware.
Easy installation with the bulb already seated
No separate bulb handling or alignment is required; the module slides into the projector and locks in place. The most common issue is forgetting to reset the lamp-hour counter after fitting, which can cause premature replacement warnings. Ensure the projector is cool and unplugged before starting.
How it compares
Measured against everything we stock in Replacement Projector Bulbs, at today’s prices. Recalculated every night.
- Price $61.99
- Cheaper than about 90% of the 9,513 comparable items (median $99.99).
- Power rating 200 W
- Lower than about 60% of the 8,831 comparable items (median 215 W).
Specifications
| Product | |
|---|---|
| Product type | Projector Lamp |
| Display | |
| Lamp lifespan | 2,000 Hrs. |
| Power | |
| Power rating | 200 W |
Questions about this item
Which Optoma projectors accept the EP716 or EP719 lamp module?
This lamp module fits Optoma projectors that list EP716 or EP719 as the original lamp part number; check your projector manual for that exact code before ordering.
Will the 200W UHP bulb match the brightness of the original lamp in my older Optoma unit?
The 200W UHP bulb is built to the same wattage and 2000-hour rating as the factory lamp, so brightness and runtime should match the original specification.
How can I verify the lamp is operating correctly after I install it?
Reset the lamp-hour counter in the projector menu, then confirm the counter starts at zero and the image reaches full brightness without flickering or error messages.
More in Replacement Projector Bulbs
Similar items
Hitachi, Ltd. CP-X3400 Projector Lamp UHB 165W 2000 Hrs
- 165 W
- 2,000 Hrs.
Hitachi, Ltd. IPJ-AW250NM Genuine Compatible Projector Lamp 210W 5000 Hrs
- 210 W
- 5,000 Hrs.
Hitachi, Ltd. HCP-U26W 215W projector lamp DT01191
- 215 W
- 2,000 (Normal) - 3,…





