OWC 128GB DDR4 2933 PC4-23400 CL21 8Rx4 288-pin 1.2V ECC LRDIMM memory upgrade
- 128 GB
- DDR4 2933
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
128GB DDR4 2933 ECC load-reduced DIMM for Dell PowerEdge FC640, M640, MX740c, MX840c and R640 servers
Capacity 128GB
This single 128GB DDR4 LRDIMM module is built for Dell PowerEdge FC640, M640, MX740c, MX840c and R640 servers. It delivers ECC load-reduced operation at 2933MHz with CL21 latency and 1.2V power. The 8Rx4 288-pin design targets administrators who need maximum capacity per slot in compatible enterprise systems.
Operating at 1.2V, the module runs at standard DDR4 voltage for load-reduced DIMMs. No heat spreader is fitted, so airflow within the server chassis handles cooling. The JEDEC-compliant design maintains rated speed and latency without additional power draw beyond the 1.2V specification.
This LRDIMM cannot be mixed with unbuffered or registered ECC memory, so it suits fresh population or full replacement rather than partial upgrades. Backward compatibility with 2133, 2400 and 2666MHz buses allows installation in slots running at lower speeds. Buyers needing smaller capacities or non-LRDIMM ECC types should look elsewhere.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2L9D48R4128G |
| Total capacity | 128 GB |
| Product type | 288-Pin DDR4 ECC LRDIMM |
| Performance | |
| Rated speed | DDR4 2933 (PC4 23400) |
| Memory | |
| CAS latency | CL21 |
| ECC support | Yes |
| Buffer type | Load Reduced |
| Memory rank | 8Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Dell PowerEdge FC640 Dell PowerEdge M640 Dell PowerEdge MX740c Dell PowerEdge MX840c Dell PowerEdge R640 |
Other versions of this model
Power down the server, open the chassis, align the 288-pin key notch with the DIMM slot, press firmly until the ejector tabs click, then verify in BIOS that the module runs at 2933 MHz; the common mistake is mixing this 8Rx4 Load Reduced module with Registered or Unbuffered DIMMs, which the platform does not support.
No routine maintenance is required; if a memory error appears, run the Dell iDRAC diagnostics to isolate the faulty DIMM and replace that single 128GB module — ECC corrects single-bit errors on the fly, but a persistent multi-bit fault means the module itself must be swapped.
The thermal envelope of the Dell PowerEdge chassis typically limits sustained throughput before the memory controller reaches its 2933 MHz ceiling; adequate airflow across the 288-pin slots keeps the 1.2V modules within spec during continuous operation.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?