We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3L ECC registered DIMMs with gold contacts

OWC

OWC 32GB (2x16GB) DDR3L 1600 ECC Registered RDIMM memory upgrade

SKU CH-K6C6-HSDYA

32 GB dual-channel DDR3L ECC registered kit at 1600 MHz for Cisco UCS C24 M3, C240 M3 and C420 M3 servers

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR3L 1600 (PC3L 12800)
  • CAS latencyCL11
  • Rated voltage1.35 V
  • Buffer typeRegistered
  • Memory rank2Rx4

Capacity 32GB (2 x 16GB)

  • ECC registered design protects data integrity in server workloads
  • 32 GB kit (2 × 16 GB) expands capacity for virtualisation and databases
  • DDR3L 1600 MHz at 1.35 V reduces power draw versus standard DDR3
  • 240-pin RDIMM form factor fits Cisco UCS C24 M3, C240 M3 and C420 M3
  • CL11 latency and 2Rx4 organisation optimise throughput for registered memory channels

32GB DDR3L ECC Registered kit for Cisco UCS

This 32 GB upgrade kit contains two 16 GB DDR3L 1600 registered DIMMs built for Cisco UCS C24 M3, C240 M3 and C420 M3 servers. ECC and registered operation provide the error correction and signal integrity required by enterprise workloads. The modules run at 1.35 V and conform to the PC3L-12800 CL11 2Rx4 specification. They replace Cisco part numbers UCSMR1X162RYA, UCSMR1X162RYARF and UCSMR2X162RYE.

240-pin 1.35V RDIMM form factor

Each module uses the standard 240-pin DDR3L RDIMM layout with no heat spreader, fitting directly into the compatible Cisco UCS chassis. Registered buffering reduces electrical load on the memory controller, allowing larger capacities per channel. The 1.35 V DDR3L voltage lowers power draw compared with standard DDR3. Buyers needing unbuffered or load-reduced DIMMs cannot use this kit.

Extends life of Cisco UCS M3 infrastructure

The kit upgrades or expands memory in the listed Cisco UCS M3 servers, delaying a full platform refresh. It is not compatible with standard desktop computers, consumer motherboards or systems that require unbuffered or load-reduced memory. Organisations running virtualisation, databases or high-density workloads on these platforms gain capacity without changing hardware generations.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $91.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $2.87 per GB
Cheaper than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameOWC
Part number1R6T32R4032P
Total capacity32 GB (2 × 16 GB)
Product type240-Pin DDR3L ECC RDIMM
Performance
Rated speedDDR3L 1600 (PC3L 12800)
Memory
CAS latencyCL11
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.35 V
Compatibility
Compatible systemsCisco UCS C24 M3
Cisco UCS C240 M3
Cisco UCS C420 M3

Other versions of this model

5 more in the same range

Questions about this item

What does the PC3L-12800 rating on these DDR3L 1600 RDIMMs mean for real-world bandwidth?

PC3L-12800 is the JEDEC standard name for DDR3L 1600, showing the modules run at 1600 MHz with a CL11 latency at 1.35 V.

Will the 240-pin 2Rx4 ECC Registered DIMMs fit the memory slots in a Cisco UCS C240 M3?

Yes, the kit is listed as compatible with the Cisco UCS C24 M3, C240 M3 and C420 M3, using the same 240-pin DDR3L RDIMM form factor those servers require.

What is the correct installation order for the two 16 GB modules in a Cisco UCS C420 M3?

Populate the lowest-numbered DIMM slots for each CPU channel first, following the server's silkscreen or manual, so the registered ECC modules initialise in the supported rank sequence.

More in Model-Specific Memory Upgrades

Similar items