OWC 32GB DDR4 3200 PC4-25600 CL22 2Rx4 288-pin 1.2V ECC Registered RDIMM for Gigabyte R292-4S1
- 32 GB
- DDR4 3200
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32GB DDR4 3200 ECC registered RDIMM for Gigabyte H262 and R292 servers, CL22 at 1.2V
Capacity 32GB
This 32GB DDR4 module runs at 3200 MT/s with CL22 latency and 1.2V operation. It uses a 2Rx4 registered design with ECC for error correction in workstations and servers. The 288-pin form factor fits specific Gigabyte platforms including H262-Z6A, H262-Z6B, H262-ZL0, H262-ZL2 and R292-4S0. It is not compatible with standard desktop computers.
Registered buffering and ECC maintain data integrity during continuous operation in multi-socket servers or NAS systems. JEDEC-standard timings at 3200, 2933, 2666, 2400 and 2133 MT/s allow the module to clock down automatically when paired with slower memory controllers. The lack of a heat spreader keeps the profile low for dense DIMM arrangements.
Verify your system requires DDR4 ECC registered RDIMMs and cannot accept unbuffered or load-reduced modules. Confirm the motherboard is one of the listed Gigabyte models before ordering. Ensure all populated slots use identical registered ECC specifications to avoid mixing incompatible memory types.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 3R2D42R432 GB |
| Total capacity | 32 GB |
| Product type | 288-Pin DDR4 ECC RDIMM |
| Performance | |
| Rated speed | DDR4 3200 (PC4 25600) |
| Memory | |
| CAS latency | 22 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Gigabyte H262-Z6A Gigabyte H262-Z6B Gigabyte H262-ZL0 Gigabyte H262-ZL2 Gigabyte R292-4S0 |
Other versions of this model
The module operates at the standard 1.2V DDR4 voltage with no heat spreader, so thermal output and power draw stay within normal JEDEC limits for registered DIMMs.
The board must support ECC Registered DDR4; the module is a single 32GB 2Rx4 DIMM that plugs directly into any compatible 288-pin slot.
Yes — the spec lists backward compatibility with 2133, 2400, 2666 and 2933MHz, so the new stick will down-clock to match the slower modules.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?