OWC 64GB (8x8GB) DDR3L 1866 CL13 ECC Registered RDIMM server RAM
- 64 GB (8 × 8 GB)
- DDR3L 1866
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB DDR3L ECC registered kit (4 × 16 GB) for Cisco UCS B200 M3, B22 M3, B420 M3, C22 M3 and C220 M3 servers
This OWC kit supplies 64GB of DDR3L memory in four 16GB registered DIMMs. It is built for Cisco UCS B200 M3, B22 M3, B420 M3, C22 M3 and C220 M3 servers that require ECC registered modules. The 240-pin form factor and 1.35V operation match the platform specifications exactly. Workstation and server administrators can use it to expand capacity or replace failed sticks.
DDR3L registered memory runs at 1600MHz with CL11 latency and cannot be mixed with unbuffered or load-reduced ECC types. The registered buffer adds one clock cycle of command delay, which the memory controller must support. Mixing ranks or voltages on the same channel will prevent the system from posting. Only platforms qualified for PC3L-12800 registered DIMMs can use this kit.
The single specification that determines compatibility is the registered ECC design. Standard desktop boards and consumer laptops accept only unbuffered non-ECC or unbuffered ECC modules, so they will not work with these DIMMs. Buyers must confirm their Cisco UCS model appears in the supported list before ordering.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1R6T32R4064S |
| Total capacity | 64 GB (4 × 16 GB) |
| Product type | 240-Pin DDR3L ECC RDIMM |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.35 V |
| Compatibility | |
| Compatible systems | Cisco UCS B200 M3 Cisco UCS B22 M3 Cisco UCS B420 M3 Cisco UCS C22 M3 Cisco UCS C220 M3 |
Other versions of this model
The kit supplies 64 GB total across four 16 GB RDIMMs, matching the maximum supported population for the listed Cisco UCS servers.
The modules run at DDR3L 1600 with CL11 latency at 1.35 V, providing the rated PC3L-12800 bandwidth when the platform memory controller operates at that speed.
The registered ECC RDIMM format is required by the compatible Cisco UCS models; the 240-pin DDR3L interface carries the 1600 MT/s signal within that registered topology.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?