OWC 8GB DDR3L 1600 CL11 1Rx4 240-pin 1.35V ECC RDIMM 1R6T31R408GB memory upgrade
- 8 GB
- DDR3L 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3L 1600 ECC registered DIMM for Supermicro SuperWorkstation 7037A, 7047AX and 7047GR systems
This 8 GB DDR3L 1600 CL11 module is a registered ECC DIMM built for Supermicro SuperWorkstation 7037A, 7047AX and 7047GR systems. It operates at 1.35 V and uses a 240-pin form factor with a 1Rx4 organisation. The part replaces Supermicro MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16 modules.
Registered buffering reduces electrical load on the memory controller, allowing stable operation when all slots are populated in multi-socket servers. ECC corrects single-bit errors on the fly, preventing silent data corruption during long compute runs. The low 1.35 V DDR3L voltage limits heat output, helping the module maintain rated CL11 timing under continuous utilisation.
This module will not work in standard desktop motherboards or any platform that requires unbuffered non-ECC memory. It also cannot be mixed with unbuffered DIMMs in the same system. Buyers needing memory for consumer PCs or laptops must select a different product.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 1R6T31R408 GB |
| Total capacity | 8 GB |
| Product type | 240-Pin DDR3L ECC RDIMM |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Memory | |
| CAS latency | CL11 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 1Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.35 V |
| Compatibility | |
| Compatible systems | Supermicro SuperWorkstation 7037A Series Supermicro SuperWorkstation 7047AX Series Supermicro SuperWorkstation 7047GR Series |
Other versions of this model
The module operates at 1.35 V, which is lower than standard DDR3 voltage, reducing overall power draw and heat output during all-day workloads.
The system must support DDR3L 1600 registered ECC memory and provide a 240-pin DIMM slot; it cannot accept unbuffered modules.
No, registered ECC memory cannot be mixed with unbuffered memory; all slots must use registered ECC modules for stable operation.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?