OWC 2U6D41R808GB 8GB DDR4 2666MHz CL19 1.2V 288-Pin UDIMM Alienware Area-51 R3 R4 R5 R6 R7 memory upgrade
- 8 GB
- DDR4 2666
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR4 2666MHz CL19 1.2V UDIMM for HP OMEN X 900-200nd, 900-200nf, 900-201la, 900-201ng and 900-201nl
This 8GB DDR4 2666MHz CL19 module is built for HP OMEN X 900 series desktops including the 200nd, 200nf, 201la, 201ng and 201nl. It installs as a standard 288-pin UDIMM running at 1.2V without ECC or heat spreader.
The part is validated for the five OMEN X model numbers listed and for systems accepting PC4-21300 unbuffered memory. It will not suit laptops, servers needing registered DIMMs, or any desktop not on the compatibility list.
The module meets JEDEC PC4-21300 specifications at CL19 latency and 1.2V. Backward compatibility with 2133MHz and 2400MHz buses is supported, so the stick will downclock automatically if the platform requires a lower speed.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Part number | 2U6D41R808 GB |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 Non-ECC UDIMM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Memory | |
| CAS latency | CL19 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | HP OMEN X 900-200nd HP OMEN X 900-200nf HP OMEN X 900-201la HP OMEN X 900-201ng HP OMEN X 900-201nl |
Other versions of this model
No heatsink is fitted on the 288-pin UDIMM; the part runs at 1.2 V without one.
The stick is rated DDR4 2666 CL19 and will not exceed that frequency.
At 1.2 V the module draws minimal power and generates little heat.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?