XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 2TB NVMe internal SSD upgrade kit for Mac Pro Late 2013, delivering up to 1534 MBps read and 1353 MBps write speeds
This 2 TB internal SSD is built as a custom blade upgrade for the Mac Pro Late 2013. It uses a PCIe 3.1 x4 NVMe 1.3 interface with a Silicon Motion SM2262EN controller and 3D TLC flash. The drive targets users who need more capacity and faster storage on that platform.
The package includes the blade SSD, a heat sink, tools and an Envoy Pro enclosure for the original drive. The blade form factor measures 22.00 mm wide, 89.00 mm deep and 2.60 mm high, weighing 8.00 g. Power draw is 0.3 W idle and 5.7 W active, operating from 0 °C to 70 °C.
Sequential reads reach 1534 MBps and writes 1353 MBps with a 1,500,000 hour MTBF. The custom blade connector fits only the Mac Pro Late 2013 running macOS 10.13 or later. Builders using standard M.2 2280 slots should choose a different drive.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | OWC |
| Product line | Aura Pro X2 |
| Model name | OWCS3DAPT4MP20K |
| Total capacity | 2 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 1,534 MB/s |
| Sequential write speed | Up to 1,353 MB/s |
| Storage | |
| NAND flash type | 3D TLC |
| Controller chip | Silicon Motion SM2262EN Controller |
| Cache memory | No DRAM (SLC) |
| Ports & slots | |
| Interface type | PCIe 3.1 x4, NVMe 1.3 |
| Power | |
| Idle power draw | 0.3 W |
| Active power draw | 5.7 W |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 2.6 mm |
| Overall width | 22 mm |
| Product depth | 89 mm |
| Product weight | 8g |
| Shipping weight | 0.45 kg |
| Package size | 152 × 114 × 53 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| Operating humidity range | 5-95% |
| Max shock tolerance | 1500G / 0.5 ms |
| More details | |
| Mean time between failures | 1,500,000 h |
Yes, the drive uses a custom blade form factor designed for that Mac Pro model and includes the required heat sink and installation tools.
macOS 10.13 or later is required for full NVMe support and TRIM operation.
The kit includes an Envoy Pro enclosure that converts the blade SSD into a portable external drive.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?