We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pannet TX6A Category 6A UTP field termination RJ45 plug

Pannet

Pannet FP6X88MTG network ethernet cable

SKU CH-4BQ9-PMS3G MPN FP6X88MTG

Field-termination RJ45 plug for Cat6A UTP cable, compatible with Cat6 and Cat5e, using forward-motion TG-style termination for 22-26 AWG conductors

  • Category 6A performance for high-speed networks
  • Field termination without special tools required
  • Compatible with Category 6 and 5e systems
  • TG-style forward motion maintains pair geometry
  • Terminates 22 to 26 AWG unshielded cable

Field Termination RJ45 Plug

The Pannet FP6X88MTG is a Category 6A UTP field termination plug designed for installers terminating 4-pair unshielded twisted pair cable on site. It supports 22 to 26 AWG solid or stranded conductors with a 100 ohm impedance rating. The two-piece design uses TG-style forward motion termination technology to maintain pair geometry and eliminate conductor untwist during assembly. It is backward compatible with Category 6 and 5e cabling systems.

Thermals Noise and Power

As a passive copper connector the plug generates no heat and produces no audible noise during operation. It draws no electrical power and adds negligible insertion loss to the link budget. The forward motion termination preserves the cable pair twist rate up to the contact point which helps maintain signal integrity across the channel. No active cooling or external power supply is required for normal use.

Termination Technology Benefits

The TG-style forward motion termination allows the installer to complete the plug in a single crimp cycle without specialised punch down tools. Maintaining pair geometry through the termination reduces near end crosstalk and improves return loss performance. The two-piece housing provides strain relief and protects the contacts during handling. This plug enables field upgrades to Category 6A performance without replacing existing horizontal cable runs.

How it compares

Measured against everything we stock in Ethernet & LAN Cables, at today’s prices. Recalculated every night.

Price $22.99
Pricier than about 67% of the 9,945 comparable items (median $14.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Size & build
Shipping weight0.45 kg
Package size160 × 90 × 22 mm

Questions about this item

How do I terminate the TX6A Category 6A UTP Field Term RJ45 Plug on 22-26 AWG cable without untwisting the pairs?

Insert each conductor into the colour-coded wire manager, maintain the pair geometry right up to the IDC contacts, then use the forward-motion TG-style tool to seat all eight wires in one press; the manager prevents untwist and keeps the 100 ohm balance required for Category 6A performance.

What part of the TX6A plug wears out if I re-terminate the same cable several times?

The insulation-displacement contacts are rated for a single termination; re-using them deforms the blades and breaks the gas-tight seal, so a new FP6X88MTG plug is required each time the cable is cut back.

At what length does the 100 ohm unshielded twisted-pair link first risk failing Category 6A alien-crosstalk limits?

The plug itself adds no length penalty; the 100 m channel limit for Category 6A is reached by the cable, so the FP6X88MTG remains transparent up to the full 100 metre installed link.

More in Ethernet & LAN Cables

Similar items