XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M.2 2280 NVMe SSD with 2TB capacity, up to 2100 MBps read and 1650 MBps write speeds, plus 290000 IOPS random read performance
The Patriot P300 is a consumer-grade internal solid-state drive built in the M.2 2280 form factor. It connects through a PCIe Gen3 x4 interface using the NVMe 1.3 protocol and is managed by a Phison E13T controller. This drive targets everyday computing, offering faster start-up and load times than traditional hard disks.
The single specification that decides compatibility is the PCIe Gen3 x4 NVMe 1.3 interface. The drive delivers sequential reads up to 2100 MBps and writes up to 1650 MBps, with random 4KB performance reaching 290000 IOPS read and 260000 IOPS write. It operates without a heatsink at a 3.80 mm profile and draws 0.38 W idle or 2.38 W active.
This SSD suits users upgrading a laptop or desktop that provides an M.2 2280 slot wired for PCIe Gen3 x4 NVMe. The low power draw helps extend battery life in portable systems. Buyers whose platforms only support PCIe x2 or who require a factory-fitted heatsink for thermal constraints should consider alternative drives.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Patriot |
| Product line | P300 |
| Model name | P300P2TBM28US |
| Total capacity | 2 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 2,100 MB/s |
| Sequential write speed | Up to 1,650 MB/s |
| Random read (4K) | Up to 290,000 IOPS |
| Random write (4K) | Up to 260,000 IOPS |
| Storage | |
| Controller chip | Phison E13T |
| Ports & slots | |
| Interface type | PCIe Gen3 x4, NVMe 1.3 |
| Power | |
| Idle power draw | 0.38 W |
| Active power draw | 2.38 W |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Overall height | 3.8 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 9g |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
In a real machine the 2100 MBps sequential read and 1650 MBps write cut boot and large-file copy times dramatically versus a hard drive, while 290,000 random read IOPS and 260,000 write IOPS keep everyday multitasking snappy.
The four-lane Gen3 link caps throughput at the stated 2100 MBps read and 1650 MBps write; NVMe 1.3 adds power-management and data-protection features but does not raise that ceiling.
Yes — the single-sided 2280 module is 22 mm wide, 3.80 mm thick and has no heatsink, so it slides into any standard M.2 2280 socket in laptops or desktops.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?