We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black controller with LCD screen and dual USB ports, 170 by 92 by 45 mm

PFCTART

PFCTART 60A MPPT Solar Charge Controller 12/24V Dual USB

SKU CH-VVDX-4Z0YW

A 60A MPPT controller auto-detects 12V or 24V systems, supports multiple battery chemistries and includes dual 5V/2A USB ports

  • Product typeKit Accessories
  • 60A MPPT controller manages 12V or 24V systems automatically
  • Dual USB ports supply 5V 2A each for phone charging
  • Multiple protections guard against overcurrent, short-circuit and reverse polarity
  • LCD screen shows real-time charging and battery status
  • Supports Flooded, AGM, GEL, LiFePO4 and lithium battery types

60A MPPT Controller for 12V/24V Systems

The PFCTART 60A MPPT Solar Charge Controller manages panel and battery operation in 12V or 24V systems automatically using a built-in microcontroller. It supports User, Flooded, AGM, GEL, LifePO4 and Lithium battery types with automatic shutdown if voltage falls out of range. Dual USB ports supply 5V/2A each for direct device charging. An LCD display shows charging and battery status.

Check PV Voltage and Battery Compatibility

Verify that your solar array open-circuit voltage does not exceed 30V for this controller. Confirm your battery bank is configured for 12V or 24V nominal voltage and matches one of the supported chemistry types. The unit self-consumes 10mA and has a loop voltage drop of 0.3V, so factor these losses into system sizing. Ensure the mounting location stays within the -4 to +122 operating temperature range.

Upgrade from PWM or Smaller MPPT Units

Replacing a basic PWM regulator with this MPPT model increases harvest efficiency, especially in cooler or partially shaded conditions. The step up is worthwhile when your panel array current approaches 60A and you need automatic 12V/24V detection plus multi-chemistry battery support. IP44 protection suits sheltered outdoor enclosures where dust and splashing water are present.

How it compares

Measured against everything we stock in Solar Panels, Kits & Cables, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 70% of the 101 comparable items (median $49.99).

Specifications

Product
Product typeKit Accessories

Questions about this item

Does the box include cables or mounting hardware, or must I buy them separately?

The controller ships as the unit only; PV cables, battery leads and mounting screws are not included and must be sourced separately.

Should I choose this 60A model or a smaller controller for my 12V system?

The 60A rating suits arrays up to the controller's 30V open-circuit limit; a smaller unit is only needed if your panel current stays well below 60A.

What does the 60A rating mean once the controller is connected to a 12V battery bank?

At 12V the controller can deliver up to 60A of charge current, limited by the panel array's 30V maximum open-circuit voltage.

More in Solar Panels, Kits & Cables

Similar items