We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Phanteks Glacier EZ-Fit tool set with tube cutter, silicone insert, bending guides for 16mm tube, squeeze bottle and 24-pin jumper

Phanteks

Phanteks Glacier EZ-Fit Tool Set 16x12mm Hard Tube Bending Tools 45/90/180° with Fill Bottle

SKU CH-XXS4-QZ47Z

Tool set for bending 16 mm OD, 12 mm ID hard tubing with 45°, 90° and 180° guides, plus cutter, 250 ml fill bottle, 24-pin jumper and 240 grit sandpaper

  • Spec summaryMaterials Tube Cutter: Plastic + Steel Bending Insert: Rubbe
  • Product typeTool Set
  • In the boxTube Cutter 1x Silicone Bending Insert 1x Bending Guides (se
  • Accurate bends with 45°, 90° and 180° jigs
  • Kink-free tubing using the silicone insert
  • Clean cuts from the professional tube cutter
  • Mess-free filling with the 250 ml squeeze bottle
  • Ready-to-use kit includes cutter, guides, insert, bottle, jumper, sandpaper and manual

Phanteks Glacier EZ-Fit Tool Set

This Phanteks tool set equips custom-loop builders with everything needed to cut, bend and fill 16 mm outer-diameter hard tubing that has a 12 mm inner diameter. The kit bundles a tube cutter, a silicone bending insert, three bending guides, a squeeze bottle, a 24-pin jumper and sandpaper in one package.

Thermals noise and power draw

As a hand-tool kit the set has no thermal output, no fan noise and no power draw of its own. The included 24-pin jumper lets you run the pump independently while leak-testing, so the rest of the system stays off and silent during fill and bleed procedures.

Upgrades and when the jump is worth it

The 45, 90 and 180 degree guides replace improvised mandrels and eliminate the trial-and-error that ruins expensive tubing. The precision cutter and 240 grit sandpaper deliver repeatable bevelled ends that seat cleanly in compression fittings. Builders who want consistent bends without kinks will find the kit pays for itself on the first loop.

How it compares

Measured against everything we stock in Heatsinks & Water Blocks, at today’s prices. Recalculated every night.

Price $14.99
Cheaper than about 55% of the 609 comparable items (median $15.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand namePhanteks
Product typeTool Set
Size & build
Shipping weight0.48 kg
Package size210 × 140 × 102 mm
In the box
In the boxTube Cutter 1x
Silicone Bending Insert 1x
Bending Guides (set) 1x
Squeeze Bottle 1x
24-Pin Jumper 1x
Sandpaper 1x
Manual 1x

Questions about this item

How do I use the 45/90/180° bending guides and silicone insert together for 16x12mm tube without kinks?

Heat the tube evenly, slide the silicone rod fully inside, then press the tube into the matching guide radius while the material is soft; the insert supports the inner wall so the bend stays round.

Which parts of this set wear out and need replacing after repeated builds?

The tube cutter blade dulls over time, the 240-grit sandpaper is single-use per project, and the silicone insert can stretch or tear if bent cold — keep spares for those three items.

What is the first limitation I hit when bending many 16x12mm tubes in one session with these tools?

The 250 ml squeeze bottle empties quickly when flushing or filling multiple loops, so you will refill it long before the guides or cutter show any fatigue.

More in Heatsinks & Water Blocks

Similar items