Phihong USA Inc. PSAC60M-480 power adapter 48V 1.25A 60W
A 60 W switching power supply delivering 48 V at 1.25 A with a universal 5.5 mm connector and included power cord
- Delivers 60 W output for demanding devices
- Universal 100-240 V input works worldwide
- Built-in IV, SC and IO protection safeguards equipment
- ISO 9000 and ISO 14000 certified manufacturing quality
- Includes power cord with 5.5 mm universal connector
48V 60W switching adapter for universal mains
The Phihong PSAC60M-480 is a 48 volt 1.25 amp switching power supply rated at 60 watts. It accepts 100 to 240 volt AC input at 50 to 60 Hz, making it suitable for worldwide mains voltages. The unit ships with a detachable power cord and a 5.5 mm barrel connector for the DC output.
Straightforward desktop installation
Plug the supplied mains cord into the adapter, then connect the 5.5 mm barrel plug to the target device. The universal input range removes the need for voltage selection switches. The only common issue is a polarity or diameter mismatch if the device requires a different barrel size or centre-pin configuration.
60 watt continuous output
The adapter delivers up to 60 watts at 48 volts, sufficient for many PoE injectors, industrial sensors and networking gear. Internal safeguards protect against incorrect voltage, short circuit and internal overheating. Loads exceeding 1.25 amps will trigger protection or cause voltage drop, so it cannot support higher-current 48 volt equipment.
How it compares
Measured against everything we stock in AC Adapters & Power Bricks, at today’s prices. Recalculated every night.
- Price $19.99
- Cheaper than about 58% of the 3,875 comparable items (median $23.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Model name | PSAC60M-480 |
Questions about this item
How do I confirm the adapter is delivering 48V 1.25A after setup?
Measure the output with a multimeter set to DC voltage; it should read 48 V under load, and the current draw should not exceed 1.25 A. The unit includes short-circuit and over-temperature protection that will shut it down if limits are exceeded.
Does the package include a mains cable and what else must I source?
The box contains the adapter and a detachable power cord. You only need to provide a device-side cable or connector that matches the 5.5 mm universal output plug.
Which model variant should I choose for a 60 W 48 V requirement?
The PSAC60M-480 is the single 60 W variant delivering 48 V at 1.25 A; no other capacity or voltage versions are listed for this model number.
More in AC Adapters & Power Bricks
Similar items
Dell AL12V1A 12V 1A 12W power adapter 5.5 x 2.5mm 2.1mm barrel plug
- USB C Charger
- 9 V





