PNY Technologies, Inc. CS1030 M280CS1030-1TB-RB 1TB internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
500 GB M.2 2280 internal SSD with NVMe 1.3 interface delivering up to 2000 MB/s read and 1100 MB/s write speeds
Model 500GB CS1030
The PNY CS1030 is a 500GB internal solid state drive built for consumer laptops and desktops. It uses 3D NAND flash and the NVMe 1.3 protocol to deliver faster boot times and quicker application launches. Sequential reads reach up to 2000 MB/s and writes up to 1100 MB/s. The drive has no moving parts and an MTBF of 2000000 hours.
Your motherboard or laptop must provide an M.2 2280 slot keyed for NVMe PCIe 3.0 x4 operation. Verify the firmware supports NVMe 1.3 boot if you plan to use this as the primary OS drive. Confirm the physical clearance allows a single-sided 4.00mm module. Older platforms limited to SATA or PCIe 2.0 will not achieve the stated speeds.
The drive operates between 0°C and 70°C and stores safely from -40°C to 85°C. Low power consumption helps extend battery life in laptops and keeps heat output minimal. With no moving parts the drive runs silently. Typical workloads stay well within the thermal envelope without active cooling.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | PNY |
| Product line | CS1030 |
| Model name | M280CS1030-500-RB |
| Total capacity | 500 GB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 2,000 MB/s |
| Sequential write speed | Up to 1,100 MB/s |
| Storage | |
| NAND flash type | 3D NAND |
| Connectivity | |
| Connection protocol | NVMe 1.3 |
| Ports & slots | |
| Interface type | PCI-Express 3.0 x4, NVMe 1.3 |
| Size & build | |
| Form factor | M.2 2280 |
| Overall height | 4 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 6.6g |
| Shipping weight | 0.03 kg |
| Package size | 148 × 100 × 16 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| More details | |
| Mean time between failures | 2,000,000 h |
Other versions of this model
The drive is supplied as a bare M.2 2280 module; no heatsink or mounting screw is included.
The 500GB model delivers up to 2000 MB/s read and 1100 MB/s write; larger capacities in the same series typically offer higher sustained write performance.
Yes, the drive is rated for up to 2000 MB/s sequential read and 1100 MB/s sequential write over a PCIe 3.0 x4 NVMe 1.3 link.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?