PNY Technologies, Inc. CS2241 M.2 2280 500GB PCI-Express 4.0 x4 internal SSD M280CS2241-500-RB
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
M.2 2280 NVMe SSD with 1TB capacity, PCI-Express 4.0 x4 interface and up to 5100 MBps read and 3200 MBps write speeds
Capacity 1TB
The PNY CS2241 is a 1TB M.2 2280 solid-state drive built for consumer desktops and laptops. It uses 3D NAND flash and the NVMe 2.0 protocol over a PCI-Express 4.0 x4 link. Sequential reads reach 5100 MBps and writes reach 3200 MBps.
The single-sided 2280 form factor slips into any M.2 PCIe 4.0 x4 socket on a desktop or laptop motherboard. No heatsink is included, so the drive relies on the board's own thermal solution. The NVMe interface removes the cable clutter and latency limits of SATA storage.
One terabyte provides room for an operating system, applications and a working game library. Sustained performance holds within the 0 °C to 70 °C operating window; beyond that thermal throttling may reduce throughput. The drive stores safely between -40 °C and 85 °C when powered off.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | PNY |
| Product line | CS2241 |
| Model name | M280CS2241-1 TB-RB |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 5,100 MB/s |
| Sequential write speed | Up to 3,200 MB/s |
| Storage | |
| NAND flash type | 3D NAND |
| Connectivity | |
| Connection protocol | NVMe 2.0 |
| Ports & slots | |
| Interface type | PCI-Express 4.0 x4 |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Shipping weight | 0.03 kg |
| Package size | 173 × 100 × 16 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
Other versions of this model
The drive is rated for continuous operation between 0 °C and 70 °C; the controller will throttle once the internal sensor reaches the upper limit of that range.
With no moving parts and no heatsink fan the SSD is completely silent; power draw stays within the normal NVMe Gen4 x4 envelope for a 1 TB 3D NAND drive.
An M.2 2280 key-M slot wired for PCI-Express 4.0 x4 with NVMe 2.0 support is needed; the drive will not work in SATA-only or PCIe 3.0-only slots.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?