XPG AGAMMIXS70B-4T-CS 4TB M.2 2280 NVMe internal SSD
- M.2 2280
- Internal SSD
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
1TB M.2 2280 NVMe 1.3 drive using 3D NAND delivers up to 5600 MB/s read and 4300 MB/s write over PCI-Express 4.0 x4 for fast boot and application load
The PNY XLR8 CS3040 is a 1 TB internal SSD in the M.2 2280 form factor. It uses 3D NAND flash and a PCI-Express 4.0 x4 interface with NVMe 1.3. The drive targets consumers who want faster boot times and quicker application launches. Sequential reads reach up to 5600 MB/s and writes up to 4300 MB/s.
This model ships without an integrated heatsink, keeping the module height at 4.00 mm for tight laptop or desktop slots. The bare PCB design suits systems that provide their own motherboard cooling or have limited vertical clearance. No additional software or mounting hardware is mentioned in the specifications.
One terabyte provides room for operating systems, large games and creative project files. The rated MTBF of 2,000,000 hours and an operating range of 0 °C to 70 °C indicate sustained reliability under intense workloads. Performance drops when the drive is installed in a PCIe Gen3 x4 slot.
Measured against everything we stock in Internal NVMe & SATA SSDs, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | PNY |
| Product line | XLR8 CS3040 |
| Model name | M280CS3040-1 TB-RB |
| Total capacity | 1 TB |
| Product type | Internal Solid State Drive (SSD) |
| Intended use | Consumer |
| Performance | |
| Sequential read speed | Up to 5,600 MB/s |
| Sequential write speed | Up to 4,300 MB/s |
| Storage | |
| NAND flash type | 3D NAND |
| Ports & slots | |
| Interface type | PCI-Express 4.0 x4, NVMe 1.3 |
| Size & build | |
| Form factor | M.2 2280 |
| Heat sink | Without HeatSink |
| Overall height | 4 mm |
| Overall width | 22 mm |
| Product depth | 80 mm |
| Product weight | 6.6g |
| Shipping weight | 0.05 kg |
| Package size | 148 × 100 × 16 mm |
| Environment & compliance | |
| Operating temperature range | 0 °C to 70 °C |
| Storage temperature range | -40 °C to 85 °C |
| More details | |
| Mean time between failures | 2,000,000 h |
The drive carries a mean-time-between-failures rating of 2,000,000 hours, indicating its expected reliability over extended use.
The specified operating temperature range tops out at 70°C; sustained loads that push the controller near this limit will trigger throttling to protect the NAND.
Without the integrated extruded aluminum heatsink the drive relies on motherboard airflow, so case ventilation becomes the main factor in keeping temperatures down during all-day workloads.
More in Internal NVMe & SATA SSDs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?