Nippon Labs USB-LI-6-SL 6 ft MFI lightning cable
- Apple
- Aluminum MFI Lightn…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A two-pack of 3 ft USB-A to USB-C nylon-braided cables supporting 3 A Quick Charge 3.0 and 480 Mb/s data sync
This two-pack provides two 3 ft USB-A to USB-C cables for charging and syncing devices with a USB-C port. The nylon-braided jacket resists tangling and the reinforced strain relief is rated for over 20,000 bend cycles. Each cable has a zinc-alloy connector shell and a 56 kΩ resistor for safe power negotiation. The pack includes one blue and one purple cable for easy identification.
The cables support Quick Charge 3.0 and deliver up to 3.1 A continuously, so a phone or tablet can charge at full speed during a long drive without the cable heating up or throttling. Data moves at USB 2.0 rates of 480 Mb/s, which is fast enough for backups and file transfers while the device is charging. The short 3 ft length keeps voltage drop low and the cabin tidy.
These cables plug into a USB-A port on a car charger, power bank or laptop, so verify that your power source provides a standard USB-A output. If your vehicle or accessory only offers USB-C ports, you will need a different cable or an adapter. The connectors are reversible USB-C on the device side, but the host end is a fixed USB-A plug.
Measured against everything we stock in Lightning Charge & Sync Cables, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Popsockets |
| Product type | Car Charger |
| Ports & slots | |
| Adapter connector | USB Type-C |
| Full-size USB ports | USB-C to USB-C |
| Size & build | |
| Overall length | 3 ft (0.91 m) |
| Cable length | 1.8 in (4.57 cm) |
| Compatibility | |
| Compatible phone brands | Universal |
The cable is rated for 3.1 A QC 3.0 charging and uses TPE-reinforced nylon braid designed for 20,000+ bend cycles, so it handles continuous high-current loads without overheating.
You need a USB-A charger that supports QC 2.0 or QC 3.0 at 3 A output; the cable’s 56 kΩ resistor and USB-A plug will then negotiate the full 3.1 A rate.
Yes — the cable is backward-compatible with standard USB-A ports and will charge at the host’s maximum available current, up to 3.1 A when the source supports QC 3.0.
More in Lightning Charge & Sync Cables
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?