We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten black and red barbed emitters on a hang tag

RAINBIRD

RAINBIRD SW20-10PK drip irrigation emitters 10-pack 2.0 GPH

SKU CH-B93Z-X99V8 MPN SW20-10PK

Ten emitters deliver 2.0 GPH each for spot watering widely spaced plants in sandy soil

  • Product typeEmitters
  • Key featuresLandscape dripline system spot watering emitters Increases f
  • Delivers 2.0 GPH controlled flow for precise watering
  • Large water passages help prevent clogging
  • Non-pressure compensating design suits sandy soils
  • Barbed ends fit 1/4 In. and 1/2 In. tubing
  • Pack includes 10 emitters for multiple plants

Spot Watering Emitters for Landscaping

This pack contains ten Rain Bird button dripper emitters designed for low-flow drip irrigation. They deliver a controlled 2.0 gallons per hour to individual plants or trees. The barbed ends accept both 1/4 inch and 1/2 inch tubing for flexible placement. Large water passages help reduce the risk of clogging during operation.

Non-Pressure Compensating Upgrade

These emitters suit gardeners adding precise spot watering to an existing dripline system. They replace basic open-ended tubing or manual watering where flow control is needed. The jump is worth it when sandy soils demand higher application rates or when widely spaced plantings require targeted delivery. Non-pressure compensating design means flow varies with system pressure.

Compatibility Check Before Ordering

Verify your system operates at or below the 40 psi pressure rating to avoid emitter damage. Confirm your tubing is either 1/4 inch or 1/2 inch diameter for a secure barbed connection. Ensure the 2.0 GPH flow rate matches the watering schedule and soil absorption capacity of the target plants. Buyers needing pressure-compensating regulation for elevation changes should consider a different emitter type.

How it compares

Measured against everything we stock in Drip Irrigation Kits & Components, at today’s prices. Recalculated every night.

Price $12.99
Pricier than about 60% of the 10 comparable items (median $12.49).

Specifications

Product
Brand nameRain Bird
Model nameSW20-10PK
Product typeEmitters
Size & build
Shipping weight0.45 kg
Package size310 × 193 × 124 mm

Questions about this item

What size tubing do the barbed ends of these emitters fit?

The barbed ends are compatible with both 1/4 In. and 1/2 In. drip irrigation tubing.

How do you install these emitters and what is the common mistake to avoid?

Push the barbed end firmly into punched 1/4 In. or 1/2 In. tubing until fully seated; the common mistake is not pushing it in far enough, which causes leaks or the emitter to pop off under pressure.

What maintenance will these emitters need over time?

They feature large water passages to help prevent clogging, but periodic flushing of the drip line is recommended to clear any sediment that could reduce the 2 GPH flow rate.

More in Drip Irrigation Kits & Components

Similar items