Corsair RM750e CP-9020295-NA 750 W power supply
- Black
- ATX 3.1 Compatible
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
ATX replacement unit delivers 350 W with single-rail output and 20+4-pin main connector
This Replace Power unit is a direct swap for the Bestec Dell PS-6351-2 and DPS-350XB-2 A power supplies. It delivers 350 W through a single 20+4 pin main connector and a +12 V rail rated at 16 A. The grey ATX chassis includes one fan and weighs 0.1 kg. It accepts 115 V or 230 V input at 50 Hz or 60 Hz.
Builders restoring an older Dell system that originally shipped with the PS-6351-2 or DPS-350XB-2 A will find the correct pin-out and voltage rails here. The unit provides +3.3 V at 13 A, +5 V at 13 A, -12 V at 0.8 A, -5 V at 0.5 A and +5 VSB at 2.5 A. Systems that require modular cabling, additional PCIe power connectors or higher total wattage should look at a different power supply.
The +12 V rail supplies 16 A, which sets the practical limit for CPU and drive power in the target machine. Rise time is under 70 ms and hold-up time is at least 17 ms at nominal input. If the build demands more +12 V current than 16 A, this unit will not meet the requirement.
Measured against everything we stock in ATX Desktop Power Supplies, at today’s prices. Recalculated every night.
New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Replace Power |
| Model name | H350N-00-RPSU-D |
| Product color | Grey |
| Product type | ATX |
| More details | |
| Fan configuration | 1 |
Yes, the unit provides a 20+4-pin main connector plus a +12V rail, matching the standard ATX motherboard power interface.
Forgetting to set the 115 / 230 V input voltage switch to match the local mains supply before powering on.
The 17 ms minimum hold-up at nominal input is a design specification; if the system loses power sooner during brownouts, the capacitors may be ageing and the PSU should be replaced.
More in ATX Desktop Power Supplies
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?