We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

RIITOP

RIITOP USB 2.0 9-pin header 1 male to 4 female splitter 2-pack

SKU CH-P7MN-B6846

Splits one motherboard USB 2.0 9-pin header into four ports with a 30 cm cable and adhesive backing

  • Connection typeUSB A to USB A
  • Cable length1 ft (0.3 m)
  • Connector count4
  • Connector details9pin USB Header Male 1 to 4 Female Extension Splitter Cable
  • Connector genderMale to Female
  • Apple compatibility9pin USB 2.0 Slot
  • Splits one motherboard USB 2.0 header into four internal ports
  • 30 cm cable gives flexible routing inside the case
  • Double chipset design keeps each connection stable
  • Foam tape backing secures the PCB to chassis or board
  • Two complete splitter kits included in the pack

Internal USB 2.0 header multiplier

This RIITOP adapter splits one motherboard 9-pin USB 2.0 header into four female 9-pin ports. The pack contains two identical boards, each with a 12in cable and a male connector that fits standard 9-pin or 10-pin headers. Builders who need extra internal USB connections for front-panel ports, card readers or lighting controllers can use these splitters.

Sustained-load behaviour

Each board includes a double chipset designed to keep the four downstream ports stable during continuous data transfer. The 12in cable length and the approximate 1.96in by .98in PCB size allow the board to sit flat inside the chassis without tension on the header. The supplier notes that both boards can be separated into single units if the layout requires it.

Compatibility check

Verify that your motherboard has a free 9-pin or 10-pin USB 2.0 header with the standard pinout before ordering. The adapter provides only USB 2.0 signalling, so devices that require USB 3.x bandwidth will not operate at their rated speed. Ensure the chassis has space for the 1.96in by .98in PCB and the 12in cable routing. Buyers who need USB 3.x internal headers or more than four ports per header cannot use this product.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $15.99
Pricier than about 55% of the 15,227 comparable items (median $14.99).

Specifications

Product
Brand nameRIITOP
Product typeU21T4-2P (9pin USB Header Male 1 to 4 Female Extension Splitter Cable Connector Adapter Hub (2Pack), USB 2.0 Port Multiplier)
Product colorBlack
Ports & slots
Connection typeUSB A to USB A
Connector count4
Connector details9pin USB Header Male 1 to 4 Female Extension Splitter Cable Hub Connector
Connector genderMale to Female
Size & build
Cable length1 ft (0.3 m)
Overall length1 ft (0.3 m)
Compatibility
Apple compatibility9pin USB 2.0 Slot

Questions about this item

Does the RIITOP USB 2.0 9-pin header splitter draw extra power or generate heat when all four ports are used continuously?

The board uses a double chipset design that runs passively; no fan or heatsink is needed and the USB 2.0 bus supplies all power, so heat and draw stay minimal even with four devices connected.

What must my motherboard already have for the RIITOP 1-to-4 USB 2.0 header adapter to work?

You need a single free 9-pin (10-pin) USB 2.0 internal header on the motherboard; the male connector plugs directly into that header and splits it into four female 9-pin ports.

Will the RIITOP splitter work alongside older USB 1.1 headers or devices I still use?

Yes — the adapter is USB 2.0 but backwards compatible, so any legacy USB 1.1 device plugged into one of the four female 9-pin ports will operate at its native speed.

More in USB Cords & Extension Cables

Similar items